dan at larescorp Posted October 13, 2014 Share Posted October 13, 2014 Nice work! I've been looking in on this thread from time to time. Keep up the good work. I have nothing to do with this post, but here is the translation. Hej Paul. Tak for besvarelsen min anmodning. Min mail er stuck@larsen.mail.dk og jeg vil sende dig pic og detaljer privat. Jeg er helt ny på dette forum. Hvis du venligst vil sende mig din mail adresse. Hilsen Henrik Stück, DanmarkTranslated to English;Hi Paul. Thanks for answering my request. My mail is stuck@larsen.mail.dk and I will send you pic and details private. I am completely new to this forum. If you could please send me your email address. Regards Henrik Stück, Denmark Link to comment Share on other sites More sharing options...
buick41 Posted October 13, 2014 Author Share Posted October 13, 2014 Thanks Dan . I sent henrik a mail also. I hope i can help him with some parts . Take care. Paul. Link to comment Share on other sites More sharing options...
Guest buickkuhn Posted October 18, 2014 Share Posted October 18, 2014 This is a sweet ride your working on . Hat is off to you - great work - I'm rebuilding my engine this winter , don't think will ever do the body . Link to comment Share on other sites More sharing options...
buick41 Posted October 19, 2014 Author Share Posted October 19, 2014 Yes she is , great car to work on . thanks .. Link to comment Share on other sites More sharing options...
falco Posted November 4, 2014 Share Posted November 4, 2014 Hi Paul, I`m also a Buick enthusiast from the Netherlands . I read your tread yesterday with great interest because the last three years I restore a `41 Special Sedanette 46S. It is nice to see your solutions for my problems.But, what a speed in restoration and still a nice job. I`ll drive my car now one year and it seems I`ve all the problems under control. It`s nice driving such an old car. Next year I`ll work to the rear axle to get more top speed for Highway use.On this time I work on a `42 Century 4drs, and this car becomes to be a ratrod with a V8 and big tires.It has a beautiful patina and is original, the engine is broke ( a connecting rod is coming out) and not to restore. <o:p></oGo on with the good job: More old BUICK`s in the Netherlands. If you like we can contact each other to see our cars live, send me a PM.<o:p></oGreetz, Bert<o:p></o Link to comment Share on other sites More sharing options...
Wilf Sedanet Posted November 4, 2014 Share Posted November 4, 2014 Hi Bert, are you the owner of the two-tone blue Buick that visits the King Cruise often? I love that car Link to comment Share on other sites More sharing options...
buick41 Posted November 4, 2014 Author Share Posted November 4, 2014 Hi Bert. Welcome to the forum. It is great to see more dutch buick enthousiastics overhere. Ill sent a pm ..paul Link to comment Share on other sites More sharing options...
falco Posted November 4, 2014 Share Posted November 4, 2014 Thanks Paul, and Wilf, Yep that`s mine. see my galery.Greetz, Bert Link to comment Share on other sites More sharing options...
buick41 Posted November 4, 2014 Author Share Posted November 4, 2014 Indeed a nice Buick Bert , So your car was on the speedcentre site What did they do with it? Link to comment Share on other sites More sharing options...
falco Posted November 5, 2014 Share Posted November 5, 2014 Yes Paul, it wasn`t possible to correct the carburetors. They are badly worn.So I bought 2 new edelbrock 94 with the same 3 stud mounts. One with a choke, one less.Then I could run the 2 carbs. simultaneously , it gives a little more power.I take the flies out off the dampervalve and close the holes of the axle.For secure I ordered the smallest Main jets (0,049)(you can Always make them bigger) and 4.5 powervalves.I adjust the carbs with only feeling and check the spark plugs.But measure is Knowledge, so I go to the speed centre and put the car on the rolling drum.And yes it hurts to hear such an old car make 4000 rpm. I was proud to myself, the people from the speed centrecould notting change on the carbs. it was perfect and has a nice air / fuel range. 93.5 HP on the rear wheel, but only 65 mph Max. at 3800 rpm.So I think to change the rear axle next year for a century axle for less rpm on the highway.Greetz, Bert Link to comment Share on other sites More sharing options...
Ben Bruce aka First Born Posted November 5, 2014 Share Posted November 5, 2014 Bert, gears from all up through 1955 will exchange. I installed a 3:36 in my '50. 4000 rpm would be over 100 mph. Ben Link to comment Share on other sites More sharing options...
buick41 Posted November 5, 2014 Author Share Posted November 5, 2014 Bert i am learning all the time. Indeed with all the modern systems it is not a garantee that it will work too for the old engines. I ll have some questions about the dampfer valve in the second carburettor some time. So i will send an email to you. . Take care. Paul Link to comment Share on other sites More sharing options...
Buicknutty Posted November 6, 2014 Share Posted November 6, 2014 Falco; I find it interesting about what you said using new Eldelbrock 94's. I've been having an awfull time with my original Stromberg AAV's on my '41 Roadmaster. Might consider doing that if I can't the Strombergs sorted out. Keith Link to comment Share on other sites More sharing options...
buick41 Posted November 30, 2014 Author Share Posted November 30, 2014 Back to the Thread again ... ;-) Finally my engine was ready ...hurraaay ...... so time to pick it up at the workshop .. there she is ............. waiting for me to take her home. and just started to get the (49) engine painted ... Yes not red or blue or whatever but grey , we will see how it shows up when it dries . Paul Link to comment Share on other sites More sharing options...
Guest Posted December 4, 2014 Share Posted December 4, 2014 First side mount straight engine 1948. Hollander interchange manual states insert bearing engines started after first 5,000 production in 1949. First side mount was 1949. Inserts. Looking at the manifolds , for sure a 248 or 263. The 320 had a three piece exhaust manifold. But it too was a side mount from 1949. Link to comment Share on other sites More sharing options...
Guest Posted December 4, 2014 Share Posted December 4, 2014 The damper under the rear carb has a round weight on the shaft the butterfly valves are attached to. It is attached off center(eccentric) to add to it's ability to keep the butterfly valves closed without bouncing off the closed position until the engine speed is high enuff to create sufficient negative pressure/vacuum to pull this valve open and pulling fuel/air though it. I think, maybe!Merry Christmas to you all, I had some really busy weeks till chrismass so now i am glad to spent some time together with my family and with the Buick offcourse .. I disambeled the carburettors and found out that the automatic choke adjuster was gone and the engine start switch was also damaged .. and from the rear carb the float was leak. so i had to find another AAV16 carb, lucky as i am i found one by Ebay .. i ordered a overhaullset by Bobs so after a smooth sandblasting the carburetors . [ATTACH=CONFIG]169254[/ATTACH][ATTACH=CONFIG]169257[/ATTACH] nice to see the amound of parts in the AAV16 carb , [ATTACH=CONFIG]169256[/ATTACH][ATTACH=CONFIG]169255[/ATTACH][ATTACH=CONFIG]169261[/ATTACH][ATTACH=CONFIG]169259[/ATTACH] [ATTACH=CONFIG]169260[/ATTACH] If anybody can explain to me how the damper valve is supposed to work , has this part to be manualy adjusted ? Paul Link to comment Share on other sites More sharing options...
buick41 Posted December 4, 2014 Author Share Posted December 4, 2014 (edited) Thanks greg for the info. Unfortunatly my partscar does have the same 49 engine. It has hydraulic valve lifters too. I am happy with that. Paul Edited December 4, 2014 by buick41 (see edit history) Link to comment Share on other sites More sharing options...
Model56s Posted December 4, 2014 Share Posted December 4, 2014 2carb40, can you tell by engine serial number if it has shell insert bearings? Thanks. Link to comment Share on other sites More sharing options...
buick41 Posted December 22, 2014 Author Share Posted December 22, 2014 Finally we placed the engine back on the frame .That was again a great moment , i had to put in the new hydraulic valve lifters recently purchased from Bob's , and i noticed that the original valve lifters had a hole in the side for the oil , the new lifters don't have that hole , I called Bob's and they told me that these were the ones that should work ........ can anyone confirm that there is no problem using the new ones without that hole? Paul Link to comment Share on other sites More sharing options...
1953mack Posted December 23, 2014 Share Posted December 23, 2014 (edited) Pics #7, #8, and #10 should clarify a lot of 'beyond belief' stories from reality expressed in other Forum Threads re: #1 manifold stud (not a bolt) and the rear-most guide pin. Nice work.Al MalachowskiBCA #8965"500 Miles West of Flint" Edited December 24, 2014 by 1953mack (see edit history) Link to comment Share on other sites More sharing options...
Buicknutty Posted December 23, 2014 Share Posted December 23, 2014 Excellent looking work!Keith Link to comment Share on other sites More sharing options...
buick41 Posted December 23, 2014 Author Share Posted December 23, 2014 Thanks Guys , Merry Christmas to you all , and lots of fun with our Buicks in 2015 Paul Link to comment Share on other sites More sharing options...
Buicknutty Posted December 24, 2014 Share Posted December 24, 2014 Merry Christmas to you and your family too!Keith Link to comment Share on other sites More sharing options...
1967 - 1997 Riviera Posted February 17, 2015 Share Posted February 17, 2015 No updates since before Christmas of last year. I'm anxiously having withdrawal symptoms! Link to comment Share on other sites More sharing options...
buick41 Posted February 18, 2015 Author Share Posted February 18, 2015 hi , I am still here but very busy with my company. There is a lot of work to be done overhere so i have not so much time for my Buick , but for sure it is impossible to do nothing with this project . Actually i am ready to start the engine and to mount the body now on the chassis ...... IN the mean time i had to complete the engine parts , for example the 1949 engine has a different pushrod cover as the 41, and i wanted to mount the oil filter on the same place as on the 41 models , so i had to create a filter mount myselve. i installed new oil and vacuum tubings , placed the carburettor and air filter. and it starts looking something now.Today the exhaust shop called that the two front pipes were ready and installed . There is a shop overhere in Utrecht that does only make exhaust pipes for classic cars . And looking to the exhaust pipe of a Buick you know it is not easy to bend , it looks more like a piece of spagetti . So i could pick up the chassis on a trailer, I am now waiting for the road inspection department RDW that they call back for an inspection of the Chassis number ..... .... It is well know that US cars had a vinnumber on a plate somewere at the front door pillar The point is that when they know there is also a number in the chassis, you have to show them that number corresponding to the title and bill of sale before you can get a licence plate . And the 41 Buick does have that number printed on the radiator mount /plate . I never noticed that number but i met a guy who restored also a 41 Buick and at the inspection they wanted to see that number and het couldt go home and disamble the front parts of his newly restored Buick (he was not happy) . So to prevent such a drama. I let it inspect and than the frame will be labeled . Than i can go on with the restoration and build the front together and start the Engine for the first time . (finally ) vin number on the radiator mount :confused: Link to comment Share on other sites More sharing options...
buick41 Posted February 18, 2015 Author Share Posted February 18, 2015 Just wanted to share a problem that i had with the main brake cilinder, After filling brake fluid it starts leaking at the nut at the back of the cilinder . So after some fighting with the brake fluid on my new chassis .. .. I removed the cilinder and found wat was causing the leak ......(bad reproduction parts ..... ) unfinished surface were the copper ring fits . So after some grinding and polishing the part was finally leaktight . The brakes now work fine . I filled the engine , the gearbox and rear axle and steeringbox with oil so were ready to go...... I made some pictures earlier i forgot to post about installing new seals in the rear levershocks , I found the Thread of a guy who placed new rings in it on this forum, So i tried to do that myselve and with a good result , I used Viton rings two large and one small ring . Oil stays in the shock now . Link to comment Share on other sites More sharing options...
JohnD1956 Posted February 19, 2015 Share Posted February 19, 2015 That is so nice it's almost a shame to reinstall the body and cover it all up. Link to comment Share on other sites More sharing options...
buick41 Posted February 19, 2015 Author Share Posted February 19, 2015 Thank you john that its true..... ...... But good news , i can bring the body tonight to the paintshop so they can spray the firewall in the right color before mounting the body on the frame. I first thought to paint it black but it is much more nicer to paint it in the color of the car. it takes me some more time but i think its worth it. Paul Link to comment Share on other sites More sharing options...
JohnD1956 Posted February 19, 2015 Share Posted February 19, 2015 I'm not an expert on this but I think the firewall would have been body color to begin with. That's the way it is on my '56. And if so, that will make for a better restoration. If nothing else it will make it nicer looking under the hood. Link to comment Share on other sites More sharing options...
1967 - 1997 Riviera Posted February 19, 2015 Share Posted February 19, 2015 I'm not an expert on this but I think the firewall would have been body color to begin with. That's the way it is on my '56. And if so, that will make for a better restoration. If nothing else it will make it nicer looking under the hood.The firewall paint on the 1941 was the same as the rest of the body. The engine also looks great installed in the chassis.The 1941 is my favorite pre-war model year, so I'm following this thread more than any other until the final, ultimate triumph of restoration! Link to comment Share on other sites More sharing options...
Guest goodguy4life Posted February 21, 2015 Share Posted February 21, 2015 agree-execllent description given-I got my 41 Roadmaster done last fall and showed in local show @ took 1stnow if i can find my original post a year ago.............. Link to comment Share on other sites More sharing options...
buick41 Posted March 23, 2015 Author Share Posted March 23, 2015 Hi , we had a great weekend with a nice Sunny sunday so we got the body back from the painter ... and we gave it a go ....... . We had a satisfied feeling yesterday after 1.5 year ... to finisch the job . freshley new body mount rubbers . And this is my new purchase .......... found a very nice 1954 Roadmaster very solid and Original ...... so in the mean time i can work on both cars ----- ( i need more time..) Paul Link to comment Share on other sites More sharing options...
1967 - 1997 Riviera Posted August 18, 2015 Share Posted August 18, 2015 No update since mid March. I'm starting to have withdrawal symptoms again. Link to comment Share on other sites More sharing options...
buick41 Posted December 6, 2015 Author Share Posted December 6, 2015 (edited) Now there is an Update finally ... took me nearly 8 months to get back working on the 41 . but we are back........ and yes. it is going very well with the Buck .. The new engine run's the car is nearly ready for its paint job ..... But it seems that someting changed at the forum, how do i upload some pictures now ? ill have to find out.. hope it won't take another year . Edited December 6, 2015 by buick41 (see edit history) Link to comment Share on other sites More sharing options...
buick41 Posted December 16, 2015 Author Share Posted December 16, 2015 (edited) Here are some pictures of the progress of the Buick , We had to repair a big dent in the gastank , So we made an opening puled out the dent and welded the tank again .The engine did had its first run ......... And yes we were happy . no big problems just a leak at the radiator and thermosstat housing .. Edited December 16, 2015 by buick41 (see edit history) Link to comment Share on other sites More sharing options...
buick41 Posted December 16, 2015 Author Share Posted December 16, 2015 I placed a video on Youtube with the engine running . https://youtu.be/T-6x8XG880o 2 Link to comment Share on other sites More sharing options...
buick41 Posted December 16, 2015 Author Share Posted December 16, 2015 A few weeks ago A friend of mine gave me a visit with his Buick 1941 .........great car . Actually the first time i had a chance to drive a 1941 Buick . 1 Link to comment Share on other sites More sharing options...
buick41 Posted December 16, 2015 Author Share Posted December 16, 2015 Put the fenders on the body ...... what a job is that ... after nearly 3 years it started to look like a Buick again . I still i am amazed about the construction with the One bolted radiator plate were the whole front unit is mounted on ..... after filling the gap between the radiator moulding and frame with nearly 2 cm i got the front fenders in line . I wanted to fitt al the body work before painting so we know what" the problem parts" are . Most of the work is getting the doors in line and the rear fenders .. Link to comment Share on other sites More sharing options...
buick41 Posted December 16, 2015 Author Share Posted December 16, 2015 Dry weather overhere last weekend so time to clean the workshop. The Buick had to move out of the Garage ....... and time to make a picture .. 1 Link to comment Share on other sites More sharing options...
Buicknutty Posted December 29, 2015 Share Posted December 29, 2015 I just listened to your video of it running and it sounds great. Nice that you got to drive a '41. During the restoration of mine, a friend dropped in and we went for a drive, with me driving, and my wife riding beside me. It was an experience that helped to get my wife more on board, as she had never ridden in a car that old before, and she was pleasantly surprised at how nice it was. Keith Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now