Dan Marx

Hummmm, are the Tommy guns hidden in the trunk?

MS 327M Chrysler, Dodge truck, DeSoto 37-51 MB 327 (babbitt)Chrysler (six), DeSoto (six),Dodge truck 37-51 CB 90 Chrysler (babbitt)(six), Desoto (six), Dodge Trk 37-51 CB 90M Same as CB 90 MB 328 same as MB327 Hope this helps. Reference: Toledo Master Catalog #24. Sure missed on the V-12 parts. Dan

First of all THANKS to the members who have helped me ID stuff before. This is a great forum. I do not have a reference for DELCO bushings, so here is a set of rubber bushings for DELCO Bushing Kit number 750. The can is marked General Motors Corp 1954. Thanks Dan Rembert, SC just a little south of Camden

Another issue to look at is what are your strong areas of expertise. Are you going to do all the co-ordination and hire out the work, do just the mechanical, ie frame, engine, brakes, and electrical and have the body work done by someone who can fabricate if necessary. I know of a very sucessful restoration shop that only does the mechanical and electrical, and schedules the body work with a local shop. Hires out the interior, unless a kit is avilable. He works on any old vehicle that comes in. Dan

Contact Ed at Eds Classic Car Service in Warren(?) MI. I sold him a Thompson book several years ago that would be the bible for identifying your bearings. syrocki <emsclassiccarcare@sbcglobal.net Good luck Dan

Thanks, I could not find it in any other reference. Dan

I have a GM relay, I suspect it is a horn(?) relay, part number is: 9794992. No idea what it fits, can you help? It is made by GM, in the USA. thanks. dmarx@bellsouth.net. Dan

Barry Go to the Mouse House on a drizzilly over cast day. You can clear all the rides and get something to eat and be exiting in less than 4 hours. No sceamin' kids or lines.

I have an NORS starter switch that fits a Franklin 1930-31. For application this would be a Delco Remy 404-T switch. $25.00 plus postage. Contact Dan at dlmarx@bellsouth.net, or 803-425-8649. Thanks dan

I have an NORS starter relay for the early Chrysler. It would be a Delco Remy 404-T switch for application. contact Dan at dlmarx@bellsouth.net, 803-425-8649. $25.00 plus postage.

I have seen at least 6 of them at swap meets. I would guess they still have them. Dan

And how big are the nuts that go with that bolt? Really gettin' deep. Dan

What, just a car?! I just want a finished garage that will hold those cars. Oh ya', don't let Santa forget the lift and all the other goodies we car guys think we need. I am waiting Santa, only two more days to make more room on your sled. Dan

I have an NOS radiator cap, still in the box, for a 1953-54 Packard (all). AC Radiator Pressure Cap, 9#, Type RC-7, part number: 850801. This also fits a 41-48 Cadillac (all). $25.00 incl ship in the USA. dlmarx@bellsouth.net, Dan at 803-425-8649

I have an NOS radiator cap, still in the box, for a 1953-54 Packard (all). AC Radiator Pressure Cap, 9#, Type RC-7, part number: 850801. This also fits a 41-48 Cadillac (all). $25.00 incl ship in the USA. dlmarx@bellsouth.net, Dan at 803-425-8649

I had a '53 T&C that is now in a museum in Japan. I found parts from a DeSoto wagon of the same vintage. They didn't call it a Town and Country. We would like to see pix of your car. There was a '53 T&C on ebay for $1000 that was restoreable, but it was in California, to far for me to ship. Dan Marx 803-425-8649

These rotors fit some of the following applications: Auburn '20-23; Chev '22-26; 2'5-26 Elcar; Grant '18-20; Kissel '18-21; Maxwell '22-25; Oakland '17-22; Oldsmobile '17-19, '20-23; Scripps Booth '18-21; Velie '17-19. Will sell them all for $10.00 each or lots of 5 for $12.00 plus $3.00 postage. These are NORS rotors. Contact Dan Marx at 803-425-8649 or dlmarx@bellsouth.net.

These rotors fit some of the following applications: Auburn '20-23; Chev '22-26; 2'5-26 Elcar; Grant '18-20; Kissel '18-21; Maxwell '22-25; Oakland '17-22; Oldsmobile '17-19, '20-23; Scripps Booth '18-21; Velie '17-19. Will sell them all for $10.00 each or lots of 5 for $12.00 plus $3.00 postage. These are NORS rotors. Contact Dan Marx at 803-425-8649 or dlmarx@bellsouth.net.

Just to be sure, that is <span style="font-weight: bold">$12.00 each </span>for the lot of 5 rotors. Thanks dan

These rotors fit some of the following applications: Auburn '20-23; Chev '22-26; 2'5-26 Elcar; Grant '18-20; Kissel '18-21; Maxwell '22-25; Oakland '17-22; Oldsmobile '17-19, '20-23; Scripps Booth '18-21; Velie '17-19. Will sell them all for $10.00 each or lots of 5 for $12.00 plus $3.00 postage. These are NORS rotors. Contact Dan Marx at 803-425-8649 or dlmarx@bellsouth.net.

YOU CAN WALK VERY EASILY AROUND AUBURN. DON'T LET THE FACT THAT A BUNCH OF "BETTER THAN YOU PEOPLE" THAT THINK THEY NEED A GOLF CART. IT IS A MONEY MAKING THING FOR KRUSE. THEY DON'T RESPECT THE VENDORS WITH ALL THE DUST CREATED AND THE SPEED THEY DRIVE EM. IF YOU HAVE A HANDICAPPED STICKER, GREAT. IF NOT, GET OFF YOU OVERSIZED DUFF AND WALK!!! WHEN I INFORMED THE SECURITY PERSON ABOUT THE GOLF CART PROBLEM, I WAS INFORMED THAT THEY COULDN'T LEAVE THEIR POST. FOR THE VENDORS AT AUBURN THE CARTS ARE A PAIN THE #%$@**!!!!! DAN

As I understand it, an umbrella policy us just that, "an umbrella" that covers all possible liabilities, which includes your classic cars. Why would you not have all your possible liabilities covered. Just my thoughts. Dan

I recently added an "umbrella policy" for all my insurance and I had to be insured by the Antique Auto Insurance carrier specified by my primary carrier (USAA). After having Hagerty for many years, I was required to change for the insurance "umbrella policy". Hagerty provided great service when I was insured with them. So, be aware what your primary carrier requires, if any. Dan Marx

I am looking for copies of an early Universal Catalog of Genuine Electical Service parts. This was published by the Automotive Electrical Assoc. I am looking for any editions published before 1932. Thanks Dan Marx dlmarx@bellsouth.net Rembert, SC

I will be travelling from Columbia, Sc to Flint, Michigan on 19 October. I have a 20 ft enclosed trailer. Contact me at dlmarx@bellsouth.net. Dan