-
Posts
79 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Everything posted by Bruce W
-
I found what I was looking for. Thanks.
-
I am wanting to replace the muffler on my 1934 Plymouth PE Coupe. Does anyone have a recommendation for a stock muffler using a stock exhaust system. I think the original may have been round and must have been very short to fit where it goes. Approximately 14" in length. If you have bought one recently, a source would be appreciated. I have the front and rear tail pipe. Thank you.
-
I have traveled in Europe by car, bicycle, motorcycle and hiking a number of times. Austria is a beautiful country with much to see. I would suggest getting familiar with the road signs before you go. Most are intuitive but some are not. At least for me. I would also recommend driving the posted speed limits. You will not be pulled over by the police. Your citation will be waiting for you in your mailbox when you get home. (I know from personal experience) You can forget about your gun, it won't be needed.
-
1934 Nash Lafayette $15K OBO
Bruce W replied to Leif in Calif's topic in "Not Mine" Automobiles For Sale
The worst thing that can happen to a car like this is someone blows it up to make a "street rod", then abandons the project leaving it in a heap. How many have we seen like that? -
The motorcycle wouldn't start so we took the tractor 😁
-
1934 Dodge rumble seat coupe
Bruce W replied to Porsche 68's topic in The Unrestored Car Appreciation Forum
Very nice car. Thank you for posting. I am restoring a 34 Plymouth PE Coupe. On your car, are the hood hold downs chromed or painted? It's a little hard to tell by the photos. The body colors appear to be Fisherman Blue with black fenders. Are the wheels Fisherman Blue, black or something else? -
I am seeing Bill Hirsch has trim rings made of brass then chromed. I think I will check these out. Thanks to all that replied.
-
Does anyone know a source for a quality set of 16" wheel trim rings? My originals are dinged up and I would like to replace them. I am afraid many I am seeing online are a cheap, flimsy imitation of the originals. I will be installing on a 1934 Plymouth.
-
pre war ....cars.....and the term or slang
Bruce W replied to arcticbuicks's topic in General Discussion
I suspect the term Pre-War may have come into use shortly after World War Two. A time when everyone knew which war you were referencing. I can understand confusion for younger folks. Sadly, since WWII there have been so many wars, one might wonder which war are you talking about? -
You might want to make sure the car wasn't stolen and stripped for parts. Its condition looks suspicious.
-
Chance to buy a 1957 Ford 2 Door Wagon. Value?
Bruce W replied to George Smolinski's topic in General Discussion
It's a neat style, but based on what I see, I would suggest a pass on this one and keep looking. Re a flip, unless you get the car for dirt cheap, you are going to get flipped. -
My 1948 DeSoto 3 window coupe restoration project.
Bruce W replied to marcapra's topic in Our Cars & Restoration Projects
Nice work Marc. I love your origin story. It looks like you have made significant progress. I think most folks here know how this old car thing goes. Sometimes we are hot, and sometimes we are cold. One thing I have learned that helps move things along is try to do at least one thing on the car every day. If you are feeling it, keep going. Take a break if you need it but keep moving forward. Once the dirty work is done, the fun begins. Best of luck on your project. Please keep us informed on your progress. I and others would be interested to see. -
Mpg - sources of data for prewar vehicle fuel consumption?
Bruce W replied to Joao46's topic in General Discussion
My stock original 40 Plymouth gets right around 15mpg. Normal driving. -
This Studebaker reminds me of a Facebook posting I saw a while back. The posting was what looked to be a fully-restored 1963 Impala convertible. The price was something like $17,900. Several postings were seen in surrounding states and cities, all using the same photos. Just for fun I inquired asking if they would take 12 hundred dollars for the car. I received a reply saying the car belonged to his sister and I could contact her if I clicked on a link. I did not click on the link and instead, chuckled to myself and moved on. It's amazing what some scammers will try. Or did I blow my chance to buy a 50 thousand dollar car for 12 hundred dollars. 😄
-
WTB - 1934 or 1935 Studebaker Roadster
Bruce W replied to Bruce W's topic in Studebaker, Erskine & Rockne
Very nice. It's a beautiful car. Thank you for sharing. Maybe "someday" one of the five will be freed from captivity. -
WTB - 1934 or 1935 Studebaker Roadster
Bruce W replied to Bruce W's topic in Studebaker, Erskine & Rockne
The model I am looking for could be called a Convertible Coupe as it has side windows and a roofline similar to a Coupe when up. Because the Studebaker literature at the time, refers to this model as a Roadster, I decided to use the term Roadster in my search. -
WTB - 1934 or 1935 Studebaker Roadster
Bruce W replied to Bruce W's topic in Studebaker, Erskine & Rockne
You are not being snide. Well, maybe a little. If you don't seek, you will never find. No harm to seek. -
I would like to find a buy a 1934 or 1935 Studebaker Roadster. Older restoration or preserved original preferred. Not interested in street rods or highly modified cars. Must also be mostly complete and not missing a lot of parts. The car is for me and will be well cared for. Thank you.
-
I would like to find a buy a 1934 or 1935 Studebaker Roadster. Older restoration or preserved original preferred. Not interested in street rods or highly modified cars. Must also be mostly complete and not missing a lot of parts. The car is for me and will be well cared for. Thank you.
-
1957 Dodge sweptside $120,000
Bruce W replied to George Smolinski's topic in "Not Mine" Automobiles For Sale
I think they meant $12000. -
I have found a pair of needed trim pieces. Many thanks to anyone that checked their parts bins.
-
WTB - Stainless cowl trim piece for a 1940 Plymouth. I was unable to find the part number in my parts book, but I believe the right and left are the same and will fit all models. I need both sides. Thank you.