-
Posts
2,542 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Posts posted by c49er
-
-
Ask this question on the p15/d24 forum.
-
You will ruin the wonderul body lines of that Diamond T.
More people will appreciate it stock than just another old truck with a obnoxious modern diesel engine stuffed under the hood.👎
-
3
-
-
Any Chrysler straight 8 core engine complete less the carb is easily worth $250.00.
The exhaust manifold alone especially for 1946-50 Chrysler 8's is worth $500.00 - $1000.00.
They can crack and do not repair by welding reliably.
Rebuilding one complete will be very expensive.
Have worked on and owned many inline eight Chryslers🙂
-
1
-
-
Round part of spring goes into A-Arm...
Matches curved spring seat...
Flat end of spring up to match flat seat area in frame.🙂
-
It's sad the 1949-52 Chrysler Crown Imperial 145" long wheelbase cars don't get much respect.
So expensive to restore...not much love.
Please follow thru and give it a new rolling life!
...BTW those Ausco-Lambert four wheel disc brakes will be very expensive to rebuild..
Parts to rebuild...naw..all rebuild work will have to be custom done by someone who lnows them.
-
Anyone hearing that a Studebaker hit 335 MPH has to make that Starlight cpe worth at least $5500.00
Those are cool looking cars.
Wish I had one.
Buy it.
-
2
-
-
Yes...Buy all your new cool battery powered tools then please package up and send me all your now obsolete geeky old air tools...that will be great!
Thanks a million!
-
1
-
2
-
-
I'm thinking this^^^ is the best answer..
-
1
-
-
Turbine oil...aka air tool oil.
-
-
-
Those 5 bolt X 20" rims are used all the way up into the 60's on Dodge, Ford,Studebaker, International and many other 1-1/2 to 2 ton medium duty trucks.
Older junk yards might have them...
I do too come on over to the Seattle area!
-
1
-
-
Ya need a permit just to have a camper in your back yard?🥴
What next!
Just build the damn thing...
-
1
-
-
Two things as mentioned above are most important for these "Hydraulically Operated" M-5 transmissions to auto up shift...
1st....idle speed must be close to 450 rpm..
2nd...transmission 10W oil full to the bottom threads of the filler plug hole on the passenger side of the case.
With these two items assured of....
With the relay fuse out and a quick road test starting out in high range...
Accelerate up to 20mph and let off the gas for say 2 seconds.
The M-5 transmission should instantly click/clunk into 4th gear...that's it.
If it doesn't auto upshift there is an internal transmission hydraulic oil pressure issue or a internal mechanical problem...
-
2
-
-
Pressure bleeding with the older style ball type tank.
It is so fast and positive bleeding, flushing out a system compared to the vacula..
I have both...I prefer the steel pressure tank type using the shop air hose to pressure it up.
The modern plastic garden sprayer pump up tanks are slow and clunky to use .... their adapters are cheap and can leak.
Have done many many system bleeds and flushes.
JMO...
-
Also measure the length of the rib on top of the housings...L/R
-
The "Hydraulically Operated" M-5 Chrysler transmission if in good operating condition can be checked to see if it will auto upshift....
By just removing the 30 amp trans relay fuse...just drive off and imediately let off the gas...should instantly upshift.
It will not downshift at any time with the fuse removed untill at a complete stop with the clutch in.
Do not back up during this test with the fuse removed.
This is only to test the hydraulic upshifting of the M-5 transmission.
As mentioned idle speed and oil level needs to be proper.
-
1
-
-
That's right...studs into the coolant on the Hemi's.
Use sealant or Locktite when re-installing the studs.
-
1
-
-
Too bad he did not sell you what you purchased...the 370 bearings.
Been there had the same thing happen.
Sellers try to substitute...
-
2
-
-
All your wives?🤣
-
3
-
-
How much were were those A-L disc brakes?
-
Contact the Airflow club.
Supposedly they are still making the heads.
-
1
-
-
All straight eights use a pointer same as the six.
-
Super great price for a rare Stromberg carb!👍
figuring out generator posts
in General Discussion
Posted
As mentioned larger stud is the "ARM"
The other smaller stud is the "FLD"
Typlical of 40's/50's MoPar generators.