Help to identify mid 1920s car

[64pontiac]

Another car that I cannot identify, someone has written circa 1925 on reverse, but no make or location. Any help is much appreciated.

 

[billorn]

Cowl and lights look like Buick.

[64pontiac]

Thanks for the help Bill.

[Leif Holmberg]

1925 Buick Touring model 25 "Standard model".

[64pontiac]

Thanks for the extra model info.

[Gunsmoke]

Wheelbase seems longer on OP, and proportions of panels a bit different, might it be a larger (not standard) Buick touring.

[64pontiac]

Thanks for the reply, I'll do a bit of searching and see if it is the larger body.

[Leif Holmberg]

You dont need to check if it is a Master car just becuse those models have 6 bolt on the rear hub.

[Gunsmoke]

The 1925 Buick Master had 120"WB and was a 7 passenger car while the 1925 Buick Standard had 114.5"WB and was a 5 passenger car. Looking at the OP, appears to be the longer Master, note the gentleman appearing to sit sideways on perhaps a rear jump seat.

[Stude17]

3 hours ago, Gunsmoke said:

The 1925 Buick Master had 120"WB and was a 7 passenger car while the 1925 Buick Standard had 114.5"WB and was a 5 passenger car. Looking at the OP, appears to be the longer Master, note the gentleman appearing to sit sideways on perhaps a rear jump seat.

The gentleman appears to be outside the car and not sitting in it to me.

[nzcarnerd]

9 hours ago, Leif Holmberg said:

1925 Buick Touring model 25 "Standard model".

The mystery car is on taller, skinnier wheels/tyres which suggest to me it is a 1924 model. The relative position of the rear door to the wheel arch is quite different to your sample 1925 car. 

 

I am going to go on a limb and suggest it is 1924 four cylinder model.

 

 

[Leif Holmberg]

I agre with you "nzcarnerd" it`s  a Canadian built  1924 4 cyl car.

(To "nzcarnerd",my 6 cyl car has 6.00 22" tires just becuse there are no other dimention of 22" made.The original dimention are 5.00 x 22".)