Packardfan84 Posted June 19, 2022 Share Posted June 19, 2022 Hey guys I just picked up a 1955 Packard 400. I want to drop the gas tank and have it lined. Does anyone know a good shop in San Diego CA that you can refer? Thanks! Link to comment Share on other sites More sharing options...
Marty Roth Posted June 19, 2022 Share Posted June 19, 2022 I have used the GAS TANK RENU service, and since back in 2006 I am pleased with the results. Mine was done in Pennsylvania, but this is a national outfit with local suppliers. There is one in your area, but I don't personally know them since I'm in New Orleans. You may wish to contact members of the Fallbrook or San Diego AACA Regions: https://orozcosautoservice.com/562-920-1871-gas-tank-repair-san-diego-california/ Link to comment Share on other sites More sharing options...
Packardfan84 Posted June 19, 2022 Author Share Posted June 19, 2022 Thank you, I will check them out and see how much it will cost , they are 2hrs away. Link to comment Share on other sites More sharing options...
Twisted Shifter Posted June 20, 2022 Share Posted June 20, 2022 Many local radiator shops offer the service, depending on your location. There are a number of DIY products that many people use - check the web for availability and customer reviews. Link to comment Share on other sites More sharing options...
TTR Posted June 20, 2022 Share Posted June 20, 2022 (edited) Depending on the condition of your existing tank, it might be worth look into new reproduction. Interestingly perhaps, but on my first visit to US in ‘84, I bought a beautiful ‘55 400 here in SoCal and drove it (nearly 3000 miles in 4 days) to Baltimore, MD and had it shipped to Europe, where I drove/enjoyed it for almost a year. Great car, great memories. It’s turquoise and white color combo made it the most amazing unexpected/unsolicited female companionship magnet I’ve ever owned. Almost every drive (in Europe) lead to some new and exciting encounter, but definitely made the mid year season of 1985 a summer of love. Edited June 21, 2022 by TTR (see edit history) 1 Link to comment Share on other sites More sharing options...
Packardfan84 Posted June 21, 2022 Author Share Posted June 21, 2022 Thanks for the replys guys! I just spoke with the Renu vendor in Los Angeles and to do the Renu process. ( dip, sandblast, coat etc...) It will cost $950!!!! They do offer just a really good cleaning for $375 they keep it dipped for a couple days. A new gas tank costs around $500 I think. Link to comment Share on other sites More sharing options...
lump Posted June 22, 2022 Share Posted June 22, 2022 I would vote for the new tank every time, if one is available. My tank was ruined when a company which specializes in "lining" them (or whatever term you prefer), baked it, causing it to warp terribly. And since it is exposed visually when installed, I simply gave up and paid to have a new one custom made. Your original tank lasted for decades, before needing replaced. Likely your reproduction tank will perform nearly as well. Wonderful insurance and peace of mind! 1 Link to comment Share on other sites More sharing options...
c49er Posted June 23, 2022 Share Posted June 23, 2022 New tank only if available. Link to comment Share on other sites More sharing options...
Packardfan84 Posted June 23, 2022 Author Share Posted June 23, 2022 Hey guys, so I took the task off yesterday. The outside looks worse than the inside. The inside actually doesn't look too bad in my opinion what do you think? I think I might just rinse it out really well and just let it be. I will wire wheel the outside, spray it with some rust inhibitor and top coat and add missing flex hose for vent. What should I clean it out with since I don't want to recoat and when I refill should I put some oil in the gas to kinda coat the tank? Thanks guys. Link to comment Share on other sites More sharing options...
Professor Posted June 24, 2022 Share Posted June 24, 2022 I would clean up the outside and repaint and just rinse the inside with fuel, shake it around, and drain. From what I see, there is no reason to send this off to a professional and I would certainly not “coat” the inside with anything. Joe 1 Link to comment Share on other sites More sharing options...
Andy J Posted June 24, 2022 Share Posted June 24, 2022 I would put a couple of good filters in the line and try that first.If that doesn't work,shell out the bucks for a new tank. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now