DB rim wanted

[trini]

😐 I am looking for clincher rim to fit a 1928 Dodge Senior 19 inch wood wheel. Tire size is 600/650 x 19 , The width is 4 and a 1/2 inches wide . If measured across diameter  it will be 21 inches. It will have 6 lugs. The ones from Graham truck will likely be the same. Please PM me. 

[sagefinds]

Surely you don't mean a clincher? rim. It would almost have to be a straight side split rim. I have a 27era Graham Bros rim and it takes a lockring,I don't believe your Dodge would take one of those.

[stakeside]

On 11/1/2021 at 8:00 PM, trini said:

😐 I am looking for clincher rim to fit a 1928 Dodge Senior 19 inch wood wheel. Tire size is 600/650 x 19 , The width is 4 and a 1/2 inches wide . If measured across diameter  it will be 21 inches. It will have 6 lugs. The ones from Graham truck will likely be the same. Please PM me. 

Got a picture?

[trini]

Thank you for the correction. I need a straight  rim. The one with a split . Use a type of jack to shrink smaller  to install or remove tires. Cheers. I have one of those jacks.  

[oldford]

I have a straight side rim that I measured at 19" but width edge to edge looks to be 4". photos below. If you can use it, the postage will be more than the cost of the rim.

 

Frank

[trini]

oldford  thank you very much I have one of those .  19 inches correct but it must be 4 and half inches wide 

 

Cheers.