stakeside Posted February 25, 2021 Share Posted February 25, 2021 I am sure the flywheel on the DA-6 should go on the crankshaft at a set position. I do see any marks to set the flywheel on the crankshaft. it appears the spacing of bolts vary to assure proper location. Are these spacing dimensions available? Your comments will help me get my truck on the road, Link to comment Share on other sites More sharing options...
Mattml430 Posted February 25, 2021 Share Posted February 25, 2021 Set number one piston to top dead centre and on the firing stroke and then place the flywheel in so the timing marks on the flywheel line up with the pointer on the bell housing. then your bolt hole will be within koowee!! 2 1 Link to comment Share on other sites More sharing options...
Ron Lawson Posted February 25, 2021 Share Posted February 25, 2021 1 hour ago, Mattml430 said: Set number one piston to top dead centre and on the firing stroke and then place the flywheel in so the timing marks on the flywheel line up with the pointer on the bell housing. then your bolt hole will be within koowee!! Matt You will have to explain a koowee 1 Link to comment Share on other sites More sharing options...
stakeside Posted February 25, 2021 Author Share Posted February 25, 2021 4 hours ago, Mattml430 said: Set number one piston to top dead centre and on the firing stroke and then place the flywheel in so the timing marks on the flywheel line up with the pointer on the bell housing. then your bolt hole will be within koowee!! Did you ever hear the saying “ can not see the forest thru the trees “ ? Thanks for solution. 1 Link to comment Share on other sites More sharing options...
stakeside Posted February 26, 2021 Author Share Posted February 26, 2021 “BINGO” with alignment tool the flywheel fits like a glove. Thanks again. Those scares are from a previous life. 2 Link to comment Share on other sites More sharing options...
30DodgePanel Posted February 28, 2021 Share Posted February 28, 2021 On 2/25/2021 at 4:37 AM, Ron Lawson said: Matt You will have to explain a koowee Yes, please explain to us Bogans... we can take it.. I need a good chuckle this evening IF it's what I think it is, we may have to save it for after hours, or at least until the wifey is out of the room ... Link to comment Share on other sites More sharing options...
30DodgePanel Posted February 28, 2021 Share Posted February 28, 2021 On 2/26/2021 at 2:53 PM, stakeside said: “BINGO” with alignment tool the flywheel fits like a glove. Thanks again. Those scares are from a previous life. Coming right along Sherm... Still no news on the part I sent you. Hang in there, the mighty USPS has assured me you'll get it. Link to comment Share on other sites More sharing options...
Mattml430 Posted February 28, 2021 Share Posted February 28, 2021 6 hours ago, 30DodgePanel said: Yes, please explain to us Bogans... we can take it.. I need a good chuckle this evening IF it's what I think it is, we may have to save it for after hours, or at least until the wifey is out of the room ... You know!! when somethings close she’s within koowee. Close enough to hear someone yell out koowee. Basically yelling out come here you silly bastard Haha. Just another thing us silly Aussie’s say. 2 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now