TheHotRodBuick Posted January 21, 2021 Share Posted January 21, 2021 Hey gals and guys. Figured I'd introduce myself . The name is Greg , from Ontario Canada. I purchased a barn find 1932 Model 67 a few years ago . The car was 99% complete and very solid. I did what most of you will hate ... I cut it up and hot rodded it. It got a new frame , new interior , new running gear. Here are a few before and after pictures. The green rims are going to black soon. 2 Link to comment Share on other sites More sharing options...
dibarlaw Posted January 21, 2021 Share Posted January 21, 2021 I would not disparrage your efforts since what you show of the car as found not much body wise could be resurected for a restoration. Our only concerns with the streetrodded examples is what became of the original drive train? The removed parts could help others in their restoration. 2 Link to comment Share on other sites More sharing options...
TheHotRodBuick Posted January 21, 2021 Author Share Posted January 21, 2021 1 hour ago, dibarlaw said: I would not disparrage your efforts since what you show of the car as found not much body wise could be resurected for a restoration. Our only concerns with the streetrodded examples is what became of the original drive train? The removed parts could help others in their restoration. The frame , and full running gear ( engine, trans, axles etc ) all went to a collector here in Ontario that owns several of these Buicks . I still have the front bumper , hood sides , and a few other odds and ends along with all sorts of original booklets like the salesman booklet from 1932 and a specs book from that year . Nothing has been crushed or sent to the garbage (other than destroyed fabric) 1 2 Link to comment Share on other sites More sharing options...
Marty Roth Posted January 21, 2021 Share Posted January 21, 2021 While not my "cuppa tea", your work looks respectable, thanks for at least saving the parts needed for another purist's use 1 Link to comment Share on other sites More sharing options...
JohnD1956 Posted January 21, 2021 Share Posted January 21, 2021 to each his/her own. Looks like a fun driver. I always wonder what hot rodders do about the wood framing in a body like this? Just ignore it, repair it, or replace with metal? How about starting a thread about your work in the modified section here? 1 1 Link to comment Share on other sites More sharing options...
cxgvd Posted January 23, 2021 Share Posted January 23, 2021 I, too, am from Ontario and recognize the new issue license plates and am amazed how hot rodders can pass the required safety inspection? At least you did not apply to use Antique Plates as many of you hot rodders do. Gary Link to comment Share on other sites More sharing options...
TheHotRodBuick Posted January 23, 2021 Author Share Posted January 23, 2021 2 hours ago, cxgvd said: I, too, am from Ontario and recognize the new issue license plates and am amazed how hot rodders can pass the required safety inspection? At least you did not apply to use Antique Plates as many of you hot rodders do. Gary The car passes all Ontario Safety requirements. I have actually added more than is required for the year of the vehicle. I have fenders that bolt on and off for changing weather conditions , but the MTO specifications state that fenders are required to stop water from being sprayed up if it's raining. If it's not raining , they are not required ... similar to transports. The exhaust has internal baffles that make it quieter than my 2007 Toyota Tundra. I have 2 young kids , so the car was built with safety in mind. It has a functional windshield wiper , horn , all lights work , even has an electric actuated park brake. I could have applied for the Antique plates but then I'd be limited in the amount I can drive it. Link to comment Share on other sites More sharing options...
TheHotRodBuick Posted January 23, 2021 Author Share Posted January 23, 2021 On 1/21/2021 at 2:17 PM, JohnD1956 said: to each his/her own. Looks like a fun driver. I always wonder what hot rodders do about the wood framing in a body like this? Just ignore it, repair it, or replace with metal? How about starting a thread about your work in the modified section here? Thanks ... it's a very fun car to drive. The rotted wood was replaced with metal. If I was a woodworker, I'd have attempted to redo the wood , but that would have been a real pain in the rear . I will start a new thread once I get all my pictures of the build in order. 2 Link to comment Share on other sites More sharing options...
C Carl Posted January 23, 2021 Share Posted January 23, 2021 I like it a lot, Greg ! Those old 4 door sedans don’t get much respect, and in as found condition would not have seen the road again. VERY well done ! Thanks for sharing. - Carl Link to comment Share on other sites More sharing options...
TheHotRodBuick Posted January 27, 2021 Author Share Posted January 27, 2021 On 23/01/2021 at 5:04 PM, C Carl said: I like it a lot, Greg ! Those old 4 door sedans don’t get much respect, and in as found condition would not have seen the road again. VERY well done ! Thanks for sharing. - Carl Thanks for the positive words. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now