EXHAUST MANIFOLD 1937 BUICK 320 ENGINE

[Marty Roth]

Wanted:

 

EXHAUST MANIFOLD 

I need the center section, but will consider buying the entire exhaust manifold if not cracked or damaged.

The correct manifold fits 1937 & 1938 Buick Roadmaster, Limited, and Century

 

[1939_Buick]

Bobs Automobilia have for sale

https://bobsautomobilia.com/manifold-parts/exhaust-manifold-center-section-1937-38-s.60-80-90-em-378/

 

Dave Tacheny may have. 

The best source of pre war Buick parts is Dave Tacheny in Champlin, MN. He specializes in 1936-1941 Buick parts. He is old school:- no email. The best way to contact him is to call him between 4 and 7 pm Central at 763-427 3460. You can also write him a letter. His address is 11949 Oregon Ave N., Champlin, MN 55316. 

http://forums.aaca.org/topic/206688-dave-tachney/

[Marty Roth]

20 hours ago, 1939_Buick said:

Bobs Automobilia have for sale

https://bobsautomobilia.com/manifold-parts/exhaust-manifold-center-section-1937-38-s.60-80-90-em-378/

 

Dave Tacheny may have. 

The best source of pre war Buick parts is Dave Tacheny in Champlin, MN. He specializes in 1936-1941 Buick parts. He is old school:- no email. The best way to contact him is to call him between 4 and 7 pm Central at 763-427 3460. You can also write him a letter. His address is 11949 Oregon Ave N., Champlin, MN 55316. 

http://forums.aaca.org/topic/206688-dave-tachney/

 

39_Buick,

Many thanks,

Yes, I had spoken with Dave Tacheny yesterday but he does not currently have any. 

If he had, of course he would prefer to keep an entire 3-piece set together,

and that would suit me just fine,

even though my front and rear sections appear undamaged.

I did note the repro from Bob's, as well as the better-priced one from CARS, Just wondering if they are from the same supplier/manufacturer?

but would really prefer a very good original (maybe even an NOS if possible?).

I am just concerned as to the quality of a modern reproduction, but it may still be the best way to go.

Does anyone have experience with the reproduction center exhaust manifold for the 1937-1938 big-series (60/80/90) cars?

[1941Buicknut]

Sorry I can't help you if you want to keep it stock. But if you want to go the Dual Carburetor set up, I could help you there.

[Auburncoupe]

I have one from a 1941 if this helps.  Please write me a private message as needed.  Thank you.

[Josephs44]

I recently purchased a 38 Buick parts car. If you are still looking for parts you can text or call me at 316-300-7226.

email is djstutzman@gmail.com

Joe