justinsdad Posted September 24, 2018 Share Posted September 24, 2018 (edited) Hi all I crossposted this last week in the parts wanted forum but thought I'd try here as well. I'm rebuilding my interior after a rewiring project required pulling the headliner and dash out. That led to painting the dash and windshield trim, which led to painting the inside window moldings. I've been able to identify all of the necessary replacement parts so far but this one (pics attached). It's a length of cording that's sewn to a cardboard strip which tucks into the window trim, and it runs around the upper 3/4 of all 4 doors. I've heard it called an anti-rattle strip but can't find the correct term to search for, or a supplier for it. I'd be very grateful for your help! Edited September 24, 2018 by justinsdad More detail (see edit history) Link to comment Share on other sites More sharing options...
28 Chrysler Posted September 24, 2018 Share Posted September 24, 2018 It looks like a type of wind-lace. Link to comment Share on other sites More sharing options...
justinsdad Posted September 24, 2018 Author Share Posted September 24, 2018 It does, but I've been unable to find a part listing for it anywhere including CPR I may break down and call LeBaron-Bonney and see if they have any ideas. I'll report back if I get anywhere with them. Link to comment Share on other sites More sharing options...
Fleek Posted September 24, 2018 Share Posted September 24, 2018 Think it is called welting. Link to comment Share on other sites More sharing options...
roysboystoys Posted September 24, 2018 Share Posted September 24, 2018 Window frame wind lace. It's smaller then the wind lace by the headliner. I'm sure it's called other things in different regions Soda or Pop? Link to comment Share on other sites More sharing options...
Spinneyhill Posted September 24, 2018 Share Posted September 24, 2018 Here is Metro's version. They call it windlace. https://www.metrommp.com/index.cfm?f=type_detail&ModelNumber=LP%2057%2DB&Type=Windlace Link to comment Share on other sites More sharing options...
justinsdad Posted October 5, 2018 Author Share Posted October 5, 2018 Hi Spinney The Windlace you show goes around the door openings, on the body of the car not the doors (e.g. it doesn't move when the doors open and close). The stuff around the windo frame is similar, but much thinner, maybe 3/16 or 1/4" wide. It's starting to look like this is a make-it-yourself kind of item. Sigh... further down the rabbit hole we go! Link to comment Share on other sites More sharing options...
roysboystoys Posted October 5, 2018 Share Posted October 5, 2018 I used rubber widow washer hose and glued the fabric with spray glue made for fabric. Link to comment Share on other sites More sharing options...
justinsdad Posted October 5, 2018 Author Share Posted October 5, 2018 Hi all I finally got around to calling Lebaron-Bonney, and the mystery is solved! The part in question is called Door Cording or Edge Welt, and they both make and sell it. They were super helpful to talk to as well; even though they're super busy they took the time to look at this post, take the question out to their floor manager and find out what the part is we're looking for. Color options from their website, in case anyone else is looking for the same thing: http://www.lebaronbonney.com/webcatalogs/fabric/files/assets/basic-html/page-22.html Thanks all for your help! I'll post pics when I get her all put back together, probably looking like spring at this point. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now