Guest deepellum3 Posted March 17, 2016 Share Posted March 17, 2016 I just purchased a 1924 Buick and was wondering if it is positive or negative ground. If anyone knows I would certainly appreciate it. Thanks Link to comment Share on other sites More sharing options...
unimogjohn Posted March 17, 2016 Share Posted March 17, 2016 6v, negative ground. Link to comment Share on other sites More sharing options...
Guest deepellum3 Posted March 17, 2016 Share Posted March 17, 2016 Thank you very much Link to comment Share on other sites More sharing options...
Guest deepellum3 Posted March 17, 2016 Share Posted March 17, 2016 This is a photo of our Buick in front and a 1925 Studebaker in the rear. We were lucky enough to have the opportunity to purchase both. Link to comment Share on other sites More sharing options...
Guest deepellum3 Posted March 17, 2016 Share Posted March 17, 2016 A Link to comment Share on other sites More sharing options...
Thriller Posted March 17, 2016 Share Posted March 17, 2016 Very nice. Link to comment Share on other sites More sharing options...
dibarlaw Posted March 18, 2016 Share Posted March 18, 2016 Thank you for sharing. I have a 1925-25 6 cylinder Standard touring that was the following years replacement for your model 35 4 cylinder. Please post more photos as you can! We love photos of the cars exterior as well as interior and engine compartment . Link to comment Share on other sites More sharing options...
Pete Phillips Posted March 18, 2016 Share Posted March 18, 2016 Hmmm, "Deepellum3"...does that mean you are from Dallas, Texas? If so, we have an active North Texas Chapter of the BCA and would love to have you and that nice '24 be a part of our club. Pete Phillips, BCA #7338 Leonard, Texas Link to comment Share on other sites More sharing options...
Guest deepellum3 Posted March 19, 2016 Share Posted March 19, 2016 We are in Dallas. Would love to meet other early Buick people. We just purchased this Buick but have yet to get it started. It was running in the last two years per previous owner. I am new to the advance/starting procedure. It belonged to the previous owners father who has passed away so the previous owner couldn't tell us how to start it. We did watch the video on YouTube but it was not informative enough. Could anyone advise on the procedure to start the car? Thanks Link to comment Share on other sites More sharing options...
GARY F Posted March 19, 2016 Share Posted March 19, 2016 On Thursday, March 17, 2016 at 7:10 PM, deepellum3 said: This is a photo of our Buick in front and a 1925 Studebaker in the rear. We were lucky enough to have the opportunity to purchase both. Where is the photo? Link to comment Share on other sites More sharing options...
Guest deepellum3 Posted March 19, 2016 Share Posted March 19, 2016 Link to comment Share on other sites More sharing options...
Guest deepellum3 Posted March 20, 2016 Share Posted March 20, 2016 Yea! I finally figured it out. Thanks for all the help! It actually started just briefly but it ran. Mid anyone has any auto glass related questions I'll be glad to help. Robert Merrill Deep Ellum Glass 4024 Main Dallas 75226 Link to comment Share on other sites More sharing options...
Mark Shaw Posted March 23, 2016 Share Posted March 23, 2016 Check the tube inside the heat riser above the carb for rust through holes. This is one of the most common problem areas for Buicks. An easy fix is to have a muffler shop press in a scrap piece of aluminized exhaust tubing. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now