Fishlicker Posted April 22, 2015 Share Posted April 22, 2015 (edited) I just pulled the fuel tank out of the truck and discovered it was coated with thick varnish and whats left of 30 year old fuel, im sure there's some rust but cant see much thru the sending unit opening. My question is whats the best method for cleaning that junk out of there. I've heard laquer thinner and Ascetone with chain or a hand full of nuts thrown in, and then just slosh it all round. Im not sure how well this will work as it looks like there is a baffle in the middle of the tank. Edited April 24, 2015 by Fishlicker (see edit history) Link to comment Share on other sites More sharing options...
30dodge35 Posted April 22, 2015 Share Posted April 22, 2015 You can use acetone or thinner, but you will never be sure you get all varnish and rust out, they sell kits for cleaning and coating, I take al my tanks to a local radiator shop , for about 150, they dip and flush tank, and put coating inside, then paint tank. I have sent my 35 tank to Nutank, they open tank up and clean and the coat tank, lifetime warranty, about 350after installation install a inline filter, cheaper then a carburator rebuild. Link to comment Share on other sites More sharing options...
Fishlicker Posted April 22, 2015 Author Share Posted April 22, 2015 Thanks 30dodge35, I'll check with local radiator shop and see about having that done. Link to comment Share on other sites More sharing options...
nearchoclatetown Posted April 22, 2015 Share Posted April 22, 2015 Don't know where you are but radiator shops around here won't/can't do them anymore. Make a solution of 3 parts water and one part molasses gotten from a feed store. Fill it to the top and let it sit for about a week. It will remove all the rust and crud and stink. Link to comment Share on other sites More sharing options...
Fishlicker Posted April 23, 2015 Author Share Posted April 23, 2015 So far your right Nearchacolatetown, made several calls today and no radiator shop does tank cleanings around my area. Since I've got more time than money I'll give your solution a try. Thanks Link to comment Share on other sites More sharing options...
Ian_Greenlaw Posted April 23, 2015 Share Posted April 23, 2015 I'd love to see some shots of your car.......always good to see another 34 !Ian Link to comment Share on other sites More sharing options...
30DodgePanel Posted April 23, 2015 Share Posted April 23, 2015 Don't know where you are but radiator shops around here won't/can't do them anymore. Make a solution of 3 parts water and one part molasses gotten from a feed store. Fill it to the top and let it sit for about a week. It will remove all the rust and crud and stink.I've always wondered if trying that method twice would work even better ? Meaning, would it hurt to go overkill in this situation ? Just don't want to eat through the metal or compromise any seams I would think....Luckily, I still have shops around here that have done a couple of tanks for me... Link to comment Share on other sites More sharing options...
nearchoclatetown Posted April 23, 2015 Share Posted April 23, 2015 Dave, if you mean use molasses twice I see know reason for it to hurt. It is a weak acid, I've had it only attack rust. Will not take off crud, grease, or paint. I do know someone that filled a MC gas tank , sealed the opening and went on vacation. Not a good idea. It erupted all over his garage and ruined the tank by swelling, guess it built pressure. If you don't completely fill the tank the solution gasses and will rust the crap out the exposed area. Filled full is perfect and CHEAP. FWIW, I do not use sealer in gas tanks either. They were never sealed from new and the new gas eats most of the sealers anyway. Most tanks were tinned or coated with something I can't remember the name of right now. The molasses doesn't hurt either. Link to comment Share on other sites More sharing options...
Fishlicker Posted April 24, 2015 Author Share Posted April 24, 2015 Ian Greenlaw I added a few Picts to original post, picking up some molasses this weekend and try it out on tank. Will up date with results. Link to comment Share on other sites More sharing options...
30dodge35 Posted April 24, 2015 Share Posted April 24, 2015 I always use the sealer kit after cleaning and removing rust, If you use the kit from Eastwood , after using the molasses which is a acid, if the initial coating was not disturbed, but since you have rust, the coating is gone, without neutralizing the acid and rincing with a base solution, the eastwood system is a three step, cleans and de-rust, then treatment will put a coating back chemically, then coat with epoxy fuel resistant coating best way way to prevent, rust from reappearing in a tank, is to keep it full when in storage and drain moisture occasionally, I also use red fuel additive for non ethanol fuel , which we still can get in Lower LA. Link to comment Share on other sites More sharing options...
Fishlicker Posted April 24, 2015 Author Share Posted April 24, 2015 I definitely planned on using a sealer after removing all the rust, that Eastwood kit sounds like exactly what I need. Thanks again 30dodge35 Link to comment Share on other sites More sharing options...
30DodgePanel Posted April 24, 2015 Share Posted April 24, 2015 Love those suicides..... thanks for the pics. One of the best body styles ever created imo..Keep us posted Link to comment Share on other sites More sharing options...
Ian_Greenlaw Posted April 24, 2015 Share Posted April 24, 2015 just a question.The grill and surround are different from the 34 Dodge passenger cars. Was this a style for the trucks ?It almost looks like a 33 to me had it been a Sedan.still learning !Thanks for the photos too.Ian Link to comment Share on other sites More sharing options...
Fishlicker Posted April 24, 2015 Author Share Posted April 24, 2015 Ian i as well am still learning, and dont know much about this truck. My Great Grandfather bought this truck new in 1934 and when he passed my father inherited the truck. dad drove it on weekends for awhile and then parked it in his garage in 1982 and there it sat up till about two years ago when i brought it home and started tinkering with it in hopes to get it back on the road. the guys on this forum have a wealth of knowledge and seem to share that knowledge only for the asking for which i am gratefull. Link to comment Share on other sites More sharing options...
Ian_Greenlaw Posted April 24, 2015 Share Posted April 24, 2015 I couldn't agree more. I have had nothing but great advice, assistance and technical knowledge freely given and nothing asked in return. I've even made a few friends along the way. Couldn't ask for more. Link to comment Share on other sites More sharing options...
30dodge35 Posted April 24, 2015 Share Posted April 24, 2015 The grill shell on the the 33 34 35 KC were the 33 sedan shell , my running board are from 33 Plymouth, the 16 wheels were used on the Plymouth , a lot of parts were interchanable, My truck is a second series 35 KC , it has the same can all streel cab as the 36 ,37, and 38, enjoy you cars and trucks, jesse Link to comment Share on other sites More sharing options...
countrytravler Posted April 24, 2015 Share Posted April 24, 2015 (edited) 1934 car front is totally different than the 33-35 truck. I'll post pictures of both later. The 37 38 cabs have a totally different firewall and dash than the 2nd series 35-36 Dodge cabs. the 37-38 Dodge cab is also shared with the 37-38 PLY truck. Different dash plaque and gauge facing. Edited April 24, 2015 by countrytravler (see edit history) Link to comment Share on other sites More sharing options...
30dodge35 Posted April 24, 2015 Share Posted April 24, 2015 Dave you would know you got probably most of them built on your lot Link to comment Share on other sites More sharing options...
countrytravler Posted April 24, 2015 Share Posted April 24, 2015 Fishlicker has a nice truck. Here is a local that we just met at a local truck BBQ and show. A 1935 1st series Dodge KC truck. His truck is featured in the (Vintage Truck) Mag. March/April issue. Really a great guy. Link to comment Share on other sites More sharing options...
Fishlicker Posted April 25, 2015 Author Share Posted April 25, 2015 Great info 30dodge35 and Country Traveler. Love the Picts. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now