Guest Stephenmilner Posted April 15, 2015 Share Posted April 15, 2015 Does anyone know if the lock washer on the rear wheel is available anywhere.I am looking at getting some laser cut.cheersSteve Link to comment Share on other sites More sharing options...
Mark Shaw Posted April 15, 2015 Share Posted April 15, 2015 I have looked for them in the past with no results. It is actually called a tab washer. Make lots of them... Link to comment Share on other sites More sharing options...
Guest Rp1967 Posted April 16, 2015 Share Posted April 16, 2015 (edited) Try a bearing supply company , they will have many assorted sizes.we use them in rebuilding hydraulic pumps on a daily basis.Edit- they are made by Whittet/Higgens Edited April 16, 2015 by Rp1967 (see edit history) Link to comment Share on other sites More sharing options...
Leif Holmberg Posted April 16, 2015 Share Posted April 16, 2015 All those "tab washer"I have found have had millimeter size and will not fit on my mid 20s Buicks:s.Leif in Sweden. Link to comment Share on other sites More sharing options...
Guest Rp1967 Posted April 16, 2015 Share Posted April 16, 2015 These are washers made by wittet higgens , the wo5 measures 1inch ID the wo7 measures 1.400 inch .unfortunatly I didn't have a wo6 to measure . Link to comment Share on other sites More sharing options...
jbbuick22 Posted April 17, 2015 Share Posted April 17, 2015 I have a box full of those washers. Post the inside and outside dimension and I'll see if I have any. John 22-6-55 Sport touring Link to comment Share on other sites More sharing options...
pacrat Posted April 18, 2015 Share Posted April 18, 2015 i made up a batch for a 32 5 bucks each if they are the same Link to comment Share on other sites More sharing options...
Guest Stephenmilner Posted April 19, 2015 Share Posted April 19, 2015 That looks like them. Mine has a 1 inch ID. If yours have the same ID, would you consider selling me 2 to save the drama of getting them cut?CheersSteve Link to comment Share on other sites More sharing options...
pacrat Posted April 19, 2015 Share Posted April 19, 2015 for sure i will send a pm Link to comment Share on other sites More sharing options...
Phillip Robinson Posted April 21, 2015 Share Posted April 21, 2015 Steve, should have bought a chevrolet. Phil. Although I have to repair my brakes and maybe replace the right rear axle. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now