Guest RivieraParadise Posted April 2, 2015 Share Posted April 2, 2015 Hello I am looking for the plastic connector with wiring intact for my 1965 Riv master power windows switch. I'm not sure if it matters but my car had the custom interior. Will need a set of switches too but mainly need the pigtail for now to get my windows working. Link to comment Share on other sites More sharing options...
JZRIV Posted April 3, 2015 Share Posted April 3, 2015 If you haven't already I'd check with Gene at abandg@aol.com Link to comment Share on other sites More sharing options...
Guest RivieraParadise Posted April 3, 2015 Share Posted April 3, 2015 If you haven't already I'd check with Gene at abandg@aol.comThank you I will give him a try. Link to comment Share on other sites More sharing options...
arnulfo de l.a. Posted April 4, 2015 Share Posted April 4, 2015 Is that your car in the avatar? BADASS COLOR! Looks like the original color of my car but prettier. Is it a candy or metallic? Would look great against my white interior.arnulfo Link to comment Share on other sites More sharing options...
Guest RivieraParadise Posted April 4, 2015 Share Posted April 4, 2015 (edited) Is that your car in the avatar? BADASS COLOR! Looks like the original color of my car but prettier. Is it a candy or metallic? Would look great against my white interior.arnulfoThank you, yes it is. It is a candy purple over a black base with micro flake. Edited April 4, 2015 by RivieraParadise (see edit history) Link to comment Share on other sites More sharing options...
lrlforfun Posted April 4, 2015 Share Posted April 4, 2015 OK Riviera People: I have a few driver's 4 gang, Custom interior power window switch cradles that are broken. The problem seem like the "keeper plate" cardboard type material that holds the individual wires in place in the plastic cradle gets brittle and then they start coming loose and failing.If someone could reproduce a substitute plate with a pin/screw type set-up to secure it to the cradle that would be fantastic. The power seat switch also seems to suffer from the same deterioration problem. Would anyone know of such a set-up? Mitch Link to comment Share on other sites More sharing options...
RivNut Posted April 5, 2015 Share Posted April 5, 2015 I've got the same situation with my '64. Two of the wires have come out of the swtich because the paper backing went pfffft. Now let's see if I can figure out which wire goes into which slot. :confused:Who's going to come up with a fix?Ed Link to comment Share on other sites More sharing options...
Guest The Angry Pilgrim Posted April 8, 2015 Share Posted April 8, 2015 Would this work? Just found it on ebay.http://www.ebay.com/itm/Cadillac-Buick-Olds-Power-Window-Master-Switch-Wiring-Harness-Connector-NEW-/221738118287?fits=Year%3A1964%7CMake%3ABuick&hash=item33a09f2c8f&vxp=mtr Link to comment Share on other sites More sharing options...
Guest RivieraParadise Posted April 8, 2015 Share Posted April 8, 2015 Would this work? Just found it on ebay.http://www.ebay.com/itm/Cadillac-Buick-Olds-Power-Window-Master-Switch-Wiring-Harness-Connector-NEW-/221738118287?fits=Year%3A1964%7CMake%3ABuick&hash=item33a09f2c8f&vxp=mtrThat will work, thank you! Looks to be a quality reproduction of the same connector that I have. Now like RivNut said, I will just need to find out which wires go where, but most of them are still laying in the connector so it shouldn't be too tough. Link to comment Share on other sites More sharing options...
RivNut Posted April 8, 2015 Share Posted April 8, 2015 WOW! I just bought one for myself.Hey Angry Pilgrim; thanks for the, link.Ed Link to comment Share on other sites More sharing options...
Guest RivieraParadise Posted April 21, 2015 Share Posted April 21, 2015 Got my new connector in and swapped the wires from old to new. Here's the wiring layout for those who have loose wires. Hope this helps. Link to comment Share on other sites More sharing options...
RivNut Posted April 21, 2015 Share Posted April 21, 2015 Thanks, This will save me a lot of time when I go to put mine back together. I got the same part a week or so ago, but haven't taken the door skin off the car yet.Ed Link to comment Share on other sites More sharing options...
lrlforfun Posted April 23, 2015 Share Posted April 23, 2015 OK Riviera People: My core sample is on it's way to the Angry Pilgrim. Hopefully he can lazer etch a piece of plastic that can attach to the cradle at a much more reasonable cost than $50. Remember, the power seat switch is also in the mix. A question? Are the colors for the power window and power switch wire looms different for 63, 64 and 65? A diagram included with the re-fabricated keeper would prove invaluable. Mitch Link to comment Share on other sites More sharing options...
Bestoffercounts Posted August 7, 2018 Share Posted August 7, 2018 I have the cardboard piece laser cut out of plastic: https://www.ebay.com/itm/63-64-65-66-Buick-Riviera-Power-Window-Switch-Driver-Wire-Plug-Cover-Repair-New/232462006912?hash=item361fd0ba80:g:WlcAAOSwRTVaXZ9S I also have the power seat version, drivers side power vent window, and passenger side window & power vent I am also in the process of reproducing the complete connector for all of the version. They will be just just like the original one. James 1 Link to comment Share on other sites More sharing options...
steelman Posted August 8, 2018 Share Posted August 8, 2018 James, do you offer a kit, or complete package with both sides? Maybe a complete kit with windows, seat, and vents? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now