Guest cbreit01 Posted September 30, 2014 Share Posted September 30, 2014 I have recently installed new LED headlights in my 64 Riviera. I took the advice of others on this board and purchased the ones from Mustang Project:http://www.mustangproject.com/ProductDisplay.aspx?ID=5e5db5b8-c86c-47df-9dd2-bae08289dc01How was the install? EASYHow is the product? AWESOME and EXTREMELY WELL BUILTHow was Mustang Project Customer Service? INEPT to say the least. They sent me the wrong product 2x, AND I had to pay to have the wrong pieces shipped back. That said, through perserverence, they eventually sent me the correct product(s) and all is well. I will be looking into having them design an LED Tail Lighing System (as they currently only offer them for 65-67 Rivieras.) Sorry-No Before Pics. Although it is the normal soft yellow glow of the old bulbs that you see on every 1st Gen Riviera that has been restored. Great looking, but not practical in todays driving world. My Riviera is my daily driver and I definetly NEED people to SEE ME at night! Link to comment Share on other sites More sharing options...
Guest dwhiteside64 Posted September 30, 2014 Share Posted September 30, 2014 Nice job. They are so bright I need to wear shades :cool:. That's pretty cool you drive your Riv daily - helps to get our cars noticed and appreciated by the general population. Thanks for letting everyone know what it took to get the job done. Link to comment Share on other sites More sharing options...
RivNut Posted September 30, 2014 Share Posted September 30, 2014 My Riviera is my daily driver and I definetly NEED people to SEE ME at night!That said, do these lights let you see down the road farther and really light up what's out there? Link to comment Share on other sites More sharing options...
Guest cbreit01 Posted September 30, 2014 Share Posted September 30, 2014 Let me put it this way...They are SOOOO bright that I had to move the low beams to the inside and the high beams to the outside :cool:so...YES they REALLY do light up the roadway! Link to comment Share on other sites More sharing options...
RivNut Posted October 1, 2014 Share Posted October 1, 2014 You might want to reconsider the placement of those lights. You're driving a pretty wide car by today's standards and someone seeing you coming head on with the dims so close together might think that you're driving a narrow car. I think that's why the factory put the dims on the outside - so they'd always be on and get oncoming drivers a good idea of how wide your car is. Just my $.02 Link to comment Share on other sites More sharing options...
JanZverina Posted October 1, 2014 Share Posted October 1, 2014 Those really do look bright! I assume that pix is with high beams on. I checked out the website so it looks like no HD alternator or other conversions are needed, but in the event one lights does burn out, are we talking ~$75 for a replacement? On a related note, has anyone with a '63 wired their lights so the parking lights remain on when the headlights are on? If someone has, please let me know what's involved. I think one of the coolest things about the '63 (and '64') is seeing them with the parking lights on, and to Ed's point, one would then realize the full width of a first-gen Riv. Talk about "mood" lighting! Link to comment Share on other sites More sharing options...
RockitRiviera Posted October 1, 2014 Share Posted October 1, 2014 Nice! Link to comment Share on other sites More sharing options...
Guest cbreit01 Posted October 1, 2014 Share Posted October 1, 2014 "Those really do look bright! I assume that pix is with high beams on. I checked out the website so it looks like no HD alternator or other conversions are needed, but in the event one lights does burn out, are we talking ~$75 for a replacement? On a related note, has anyone with a '63 wired their lights so the parking lights remain on when the headlights are on? If someone has, please let me know what's involved. I think one of the coolest things about the '63 (and '64') is seeing them with the parking lights on, and to Ed's point, one would then realize the full width of a first-gen Riv. Talk about "mood" lighting!" My lights in the 64 are wired so that when the low beams are on, so are the parking/cornering lights. So hopefully oncoming traffic will understand that something BIG is headed their way! I'll try and get a pick of that to post. I had a guy at the gas station stop me last week (it was the early AM) and he wanted to get a pic of the low beams and cornering lights on. Link to comment Share on other sites More sharing options...
1967 - 1997 Riviera Posted October 1, 2014 Share Posted October 1, 2014 Have you tried driving your car at night during a rainstorm or snow storm? Knowing how one needs to drive under these conditions using lower intensity headlamps to prevent a visibility "white out", I would be interested in knowing how your extra bright LEDs affect driving in adverse weather conditions. Link to comment Share on other sites More sharing options...
Guest cbreit01 Posted October 1, 2014 Share Posted October 1, 2014 Haven't tried any snow yet, but no problems in the rain. Link to comment Share on other sites More sharing options...
RivNut Posted October 1, 2014 Share Posted October 1, 2014 My lights in the 64 are wired so that when the low beams are on, so are the parking/cornering lights. The factory made this change for the '64 model. There's a small relay on the passenger's side inner fender that controls this function.Ed Link to comment Share on other sites More sharing options...
Guest cbreit01 Posted October 3, 2014 Share Posted October 3, 2014 sorry, it was raining out, so it may be a bit blurry. But you get the idea Link to comment Share on other sites More sharing options...
RockinRiviDad Posted October 7, 2014 Share Posted October 7, 2014 They are SOOOO bright that I had to move the low beams to the inside and the high beams to the outsideHow did moving the location of the low beams to the inside help??David Link to comment Share on other sites More sharing options...
Guest cbreit01 Posted October 7, 2014 Share Posted October 7, 2014 I have the beams so they are pointed just to the outside center of the road. I still get the full view of the lane as i would if they were on the on the outside due to their brightness. With the high beams on tbe outside, pointed slightly inward, i can still see any deer along side of the road ;0) Link to comment Share on other sites More sharing options...
RivNut Posted October 8, 2014 Share Posted October 8, 2014 High beams are designed to point straight ahead. Low beams, when on high are designed to point straight ahead as well but only when the high beams are on. When you 'dim' your headlights, the low beams are designed to shift down and to the right. A simple way to adjust them is to park on a level surface that has a wall on one end (the darker the wall the better, less reflection.) Park 25 feet from the wall. Measure the height of the center of the headlight bulb from the ground then mark the same measurement on the wall. Do this for all four lights. Getting the height from the ground isn't hard, the harder part is making sure that the marks on the wall are exactly in front of the the lamps. One way of doing that is to sight down the center of the car and get help spotting a line on the mark then measure the distance from the center of the grill to the center of each head lamp; mark those measurements on the wall. Turn the headlights on bright and cover the low beams so they don't shine on the wall. Adjust the ones that are uncovered so that the center of the beams fall directly on the marks on the wall. Then cover the high beams and do th low beams. Your lights are now adjusted properly. When you 'dim' the lights, you'll see that the low beams shift down and to the right (lights up the right hand side of the road. ) Link to comment Share on other sites More sharing options...
Rivman Posted October 9, 2014 Share Posted October 9, 2014 High beams are designed to point straight ahead. Low beams, when on high are designed to point straight ahead as well but only when the high beams are on. When you 'dim' your headlights, the low beams are designed to shift down and to the right. A simple way to adjust them is to park on a level surface that has a wall on one end (the darker the wall the better, less reflection.) Park 25 feet from the wall. Measure the height of the center of the headlight bulb from the ground then mark the same measurement on the wall. Do this for all four lights. Getting the height from the ground isn't hard, the harder part is making sure that the marks on the wall are exactly in front of the the lamps. One way of doing that is to sight down the center of the car and get help spotting a line on the mark then measure the distance from the center of the grill to the center of each head lamp; mark those measurements on the wall. Turn the headlights on bright and cover the low beams so they don't shine on the wall. Adjust the ones that are uncovered so that the center of the beams fall directly on the marks on the wall. Then cover the high beams and do th low beams. Your lights are now adjusted properly. When you 'dim' the lights, you'll see that the low beams shift down and to the right (lights up the right hand side of the road. )OR, you could just use one of these ...AC Guide Headlight Headlamp Aiming Kit T3Then you would know they were adjusted correctly? Link to comment Share on other sites More sharing options...
63 Rivi Posted October 15, 2014 Share Posted October 15, 2014 Looks great, nice upgrade. I give you credit using your 63 everyday, would love to do that but people around here drive like they are on amphetamines, lol. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now