KLTARGA72 Posted August 15, 2013 Share Posted August 15, 2013 (edited) I have TWO very good condition bent spoke wire wheels. When purchased I was told they came off a Classic car from the mid 30's.I compared the lug bolt pattern to Ford 16 inch wheels and they are different. Also note how big the hub cap diameter is. I attended the Auburn Indiana national meet and while there I visited the ACD Museum, I compared photos I had to a 1935 Auburn and they looked identicalI'm asking $475.00 for the pair OBO.SOLD!!!!! Edited April 7, 2014 by KLTARGA72 (see edit history) Link to comment Share on other sites More sharing options...
Curti Posted August 16, 2013 Share Posted August 16, 2013 1935 Auburn six and eight are different. What is the dimension of the bolt pattern and the hubcap opening Link to comment Share on other sites More sharing options...
KLTARGA72 Posted August 16, 2013 Author Share Posted August 16, 2013 The hubcap opening is six and nine/sixteenth's inches....the bolt pattern i measured from center of hole to adjacent hole (center) is three inches......I also measured from center of bolt hole ACROSS HUB opening to center of bolt hole is four and three/quarters inchI hope this helps,,, These wheels are stamped,,, Motorwheel Corp. Lansing MI. Link to comment Share on other sites More sharing options...
Curti Posted August 16, 2013 Share Posted August 16, 2013 The hubcap opening for 1934-1936 Auburn wire wheel both 6 & 8 is 6 5/16" . The bolt pattern for an 8 is 5 1/2 inches and the bolt pattern for a six is 5 inches. Armed with that information I would say the wheels are not 34-36 Auburn. Link to comment Share on other sites More sharing options...
Guest prs519 Posted August 16, 2013 Share Posted August 16, 2013 EASY enough to be off a quarter when measuring. Make sure you are diametical. Link to comment Share on other sites More sharing options...
Curti Posted August 17, 2013 Share Posted August 17, 2013 When measuring the wheel lug bolt holes, measure from the center of a hole to the center of the next second hole. I have one of those plastic disks that are placed over the hub, that when aligned over all five holes it tells you exactly what the pattern is. It is basically a no brainer, which is good for me. Link to comment Share on other sites More sharing options...
JACK M Posted August 17, 2013 Share Posted August 17, 2013 When measuring the wheel lug bolt holes, measure from the center of a hole to the center of the next second hole. I have one of those plastic disks that are placed over the hub, that when aligned over all five holes it tells you exactly what the pattern is. It is basically a no brainer, which is good for me.Center of one hole to the outside of the second next hole. Link to comment Share on other sites More sharing options...
KLTARGA72 Posted August 17, 2013 Author Share Posted August 17, 2013 Thanks Dave for the picture,,, My earlier post states one of my measurements of 4 3/4 inch's was across the opening of the hub (or skipping past adjacent bolt hole) measuring from center of bolt hole to center of bolt hole, exactly as you show in your detailed pictureIf I measure as Jack M. states in his post then I have a five inch bolt pattern...So depending on how you measure this is what I have. I hope someone might know what these wheels fit, they are in very good shape and someone out there needs them!!!KL Link to comment Share on other sites More sharing options...
Curti Posted August 17, 2013 Share Posted August 17, 2013 The picture that Dave posted is the only way to measure the bolt pattern. on a five lug wheel. Link to comment Share on other sites More sharing options...
keiser31 Posted August 17, 2013 Share Posted August 17, 2013 (edited) [ATTACH=CONFIG]209138[/ATTACH]This should make it clear:cool:Sorry to disagree, but you will not get a true bolt pattern measurement this way. Try this video for a more precise way...How to measure a wheel bolt circle 4, 5, & 6 bolt. - YouTube Edited August 17, 2013 by keiser31 (see edit history) Link to comment Share on other sites More sharing options...
countrytravler Posted August 18, 2013 Share Posted August 18, 2013 Sorry to disagree, but you will not get a true bolt pattern measurement this way. Try this video for a more precise way...How to measure a wheel bolt circle 4, 5, & 6 bolt. - YouTube That is debatable. This is the standard norm with dad working at GM in Det and me at FOMOCO in Dearborn, this is how we were taught to measure. But i have seen it done more recently like they did on YouTube. When I sell wheels, I tell people to do it this way. I also have the Snap on tools that measure it my way. Try calling some of the major tire company's to see how they measure. Link to comment Share on other sites More sharing options...
keiser31 Posted August 18, 2013 Share Posted August 18, 2013 (edited) Whatever works for ya. I would think that if you went from the center of the stud across from the pilot hole and to the center of the pilot hole from that stud would give the true dimension. It's how geometry works in the architecture that I do. Edited August 18, 2013 by keiser31 (see edit history) Link to comment Share on other sites More sharing options...
countrytravler Posted August 18, 2013 Share Posted August 18, 2013 Whatever works for ya. I would think that if you went from the center of the stud across from the pilot hole and to the center of the pilot hole from that stud would give the true dimension. It's how geometry works in the architecture that I do. Then would that be the same with 4 and 6 lug? The ytube was a good one. Have not seen that before. Thanks for sharing. Link to comment Share on other sites More sharing options...
Curti Posted August 18, 2013 Share Posted August 18, 2013 Or you have a tool like this. The tool guys at the larger swap meets have them for a buck. Link to comment Share on other sites More sharing options...
keiser31 Posted August 18, 2013 Share Posted August 18, 2013 Geometry tells me that if you draw a circle that goes through the center each of the five holes, the diameter of that circle is the bolt pattern dimension.....just as the four and six lug except the five lug has no hole directly across. If there was a hole directly across it would go through the center of the imaginary hole. Or....yeah.....use the tool if you have it or buy it. Link to comment Share on other sites More sharing options...
JACK M Posted August 18, 2013 Share Posted August 18, 2013 My flash player is not working so I cannot watch the video at the moment.However, you are looking for the diameter of a circle, The pic that Dave shows will not give you that.The rule of thumb for a 5 bolt circle has always been center of one hole to the outside of the second next hole.Remember this is only rule of thumb but has always worked for me.On even numbered circles it is much easier to determine the true diameter. Link to comment Share on other sites More sharing options...
Curti Posted August 18, 2013 Share Posted August 18, 2013 Well, I'll be dipped, I always thought the spacing was center to center. I learn something new every day! Link to comment Share on other sites More sharing options...
countrytravler Posted August 18, 2013 Share Posted August 18, 2013 [h=2]Bolt Pattern[/h]Lea esta página en español[TABLE=width: 490]<tbody>[TR][TD=width: 190][TABLE=class: techrows, width: 175]<tbody>[TR][TH=class: title, bgcolor: #555555, colspan: 2, align: center]Conversion Table[/TH][/TR][TR][TH=class: head, align: center]Inches[/TH][TH=class: head, align: center]Millimeters[/TH][/TR]</tbody><tbody style="text-align: center;">[TR][TD]4 x 3.93[/TD][TD]4 x 100[/TD][/TR][TR=class: grey, bgcolor: #DDDDDD][TD]4 x 4.25[/TD][TD]4 x 107.95[/TD][/TR][TR][TD]4 x 4.33[/TD][TD]4 x 110[/TD][/TR][TR=class: grey, bgcolor: #DDDDDD][TD]4 x 4.50[/TD][TD]4 x 114.3[/TD][/TR][TR][TD]4 x 5.12[/TD][TD]4 x 130[/TD][/TR][TR=class: grey, bgcolor: #DDDDDD][TD]4 x 5.51[/TD][TD]4 x 140[/TD][/TR][TR][TD]5 x 4.00[/TD][TD]5 x 100[/TD][/TR][TR=class: grey, bgcolor: #DDDDDD][TD]5 x4.25[/TD][TD]5 x 107.95[/TD][/TR][TR][TD]5 x 4.50[/TD][TD]5 x 114.3[/TD][/TR][TR=class: grey, bgcolor: #DDDDDD][TD]5 x 4.53[/TD][TD]5 x 115[/TD][/TR][TR][TD]5 x 4.72[/TD][TD]5 x 120[/TD][/TR][TR=class: grey, bgcolor: #DDDDDD][TD]5 x 4.75[/TD][TD]5 x 120.65[/TD][/TR][TR][TD]5 x 5.12[/TD][TD]5 x 130[/TD][/TR]</tbody>[/TABLE][/TD][TD]Bolt pattern or bolt circle is the diameter of an imaginary circle formed by the centers of the wheel lugs. Bolt patterns can be 4-, 5-, 6-, or 8-lug holes. A bolt circle of 4x100 would indicate a 4-lug pattern on a circle with a diameter of 100mm.The diagram below indicates the proper measuring methods. 6-lug wheels are measured like 4-lug wheels.NOTE: When measuring a 5-lug wheel the measurement is only an estimate unless accurately measured using a bolt pattern gauge. A bolt pattern gauge is a specialty tool and is not widely available. To ensure the proper fitment of 5-lug wheels, Tire Rack’s fitment specialists have the exact bolt pattern information for all vehicles and review the information before listing a wheel as an exact fit for that vehicle in search results. When selecting wheels by vehicle, only wheels that will be a proper fit for the vehicle selected are shown.[/TD][/TR]</tbody>[/TABLE] Link to comment Share on other sites More sharing options...
countrytravler Posted August 18, 2013 Share Posted August 18, 2013 Link to comment Share on other sites More sharing options...
countrytravler Posted August 18, 2013 Share Posted August 18, 2013 Well, I'll be dipped, I always thought the spacing was center to center. I learn something new every day!10/4 on that!:confused: Link to comment Share on other sites More sharing options...
JACK M Posted August 19, 2013 Share Posted August 19, 2013 (edited) Dave, That little yellow tool looks to have different offsets from top to bottom, You are showing that the bottom fits but the markings are on the top.Just an observation, maybe they read like that.The chart at the top of post 19 is how I have always done it.This lower most picture doesn't show that same dimension.My tire guy has those same tools and I have to stop by there today and I will take a look, but my gut tells me that the tool would be marked with the dimensions on the side that you would measure with. Edited August 19, 2013 by JACK M (see edit history) Link to comment Share on other sites More sharing options...
countrytravler Posted August 19, 2013 Share Posted August 19, 2013 Dave, That little yellow tool looks to have different offsets from top to bottom, You are showing that the bottom fits but the markings are on the top.Just an observation, maybe they read like that.The chart at the top of post 19 is how I have always done it.This lower most picture doesn't show that same dimension.My tire guy has those same tools and I have to stopYEP your correct Jack, how do you fix stupid? Link to comment Share on other sites More sharing options...
countrytravler Posted August 19, 2013 Share Posted August 19, 2013 Dave, That little yellow tool looks to have different offsets from top to bottom, You are showing that the bottom fits but the markings are on the top.Just an observation, maybe they read like that.The chart at the top of post 19 is how I have always done it.This lower most picture doesn't show that same dimension.My tire guy has those same tools and I have to stopYEP your correct Jack, how do you fix stupid?You erase it and start all over again until you get it correct. Will redo later. Thanks for bring it to my attention. Link to comment Share on other sites More sharing options...
Curti Posted August 19, 2013 Share Posted August 19, 2013 After all of this, do you suppose the OP knows what he has? Link to comment Share on other sites More sharing options...
countrytravler Posted August 19, 2013 Share Posted August 19, 2013 At least its enformative:confused: Link to comment Share on other sites More sharing options...
Curti Posted August 19, 2013 Share Posted August 19, 2013 One thing for sure, you and I have been informed. Link to comment Share on other sites More sharing options...
KLTARGA72 Posted August 29, 2013 Author Share Posted August 29, 2013 Sorry it has taken a week to respond. I'm certain that the wheels I have are identical in size and style to what I saw on the 35 Auburn. I will try to pick up a wheel gauge as shown and confirm measurements. Link to comment Share on other sites More sharing options...
Guest prs519 Posted August 30, 2013 Share Posted August 30, 2013 (edited) Not a chance! This post in response to whether the original poster knows what he has? I missed the reply with quote, somehow. Edited August 30, 2013 by prs519 addition of info (see edit history) Link to comment Share on other sites More sharing options...
texas webb Posted September 8, 2013 Share Posted September 8, 2013 Late finding this.I have wheels like that,They are 5on6"pattern bolt 16x5" motor wheel mfg for 32-33 Buick. Link to comment Share on other sites More sharing options...
KLTARGA72 Posted February 25, 2014 Author Share Posted February 25, 2014 I finally got around to purchasing a bolt pattern gauge and the wheels are 5 inch from center to center. The wheels are 16 inch and measure 5 7/8 inch from front rim to back rim.If anybody thinks they can use these or need more information please call 828-891-8299 KL Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now