fozz71 Posted May 27, 2013 Share Posted May 27, 2013 Where the heck can a guy find good strong PEDAL return springs for my '28 Dodge- they are probably about a 6" spring with hooks on both ends? My brake pedal takes two of them alone. Any ideas??? Thanks- Jim Link to comment Share on other sites More sharing options...
P Bohlig Posted May 27, 2013 Share Posted May 27, 2013 Try either Myers or Romar Link to comment Share on other sites More sharing options...
nearchoclatetown Posted May 27, 2013 Share Posted May 27, 2013 If you know the wire diameter and coil diameter, and length McMaster-Carr has them as does Lee Springs. Link to comment Share on other sites More sharing options...
Guest 1930 Posted May 27, 2013 Share Posted May 27, 2013 If you have the original look at it closely, I think you may see that it is a spring within a spring, I do not believe these are avail but you will instead have to source some from E-bay or someone with an extra. If you had some way of determining the strength than I am sure a single spring set-up would work as well but I am guessing you have no way of testing this. Link to comment Share on other sites More sharing options...
fozz71 Posted May 27, 2013 Author Share Posted May 27, 2013 Thanks for all the suggestions, Gents! Link to comment Share on other sites More sharing options...
kevin b Posted May 28, 2013 Share Posted May 28, 2013 Acklands grainger industrial supply or other company usually have catalogs with lots of different sizes Link to comment Share on other sites More sharing options...
knobless Posted June 11, 2013 Share Posted June 11, 2013 Thanks for all the suggestions, Gents!I may have one , please post a picture and a measure of length, Link to comment Share on other sites More sharing options...
fozz71 Posted June 11, 2013 Author Share Posted June 11, 2013 Thanks for the response- but I found lots of sizes at my local Menards and was able to hook two up and that seemed to do the trick. Link to comment Share on other sites More sharing options...
juanatejeda Posted June 13, 2013 Share Posted June 13, 2013 There is a guy in Ventura, CA that has a 28 Dodge Brothers Flatbed truck and has, just about complete, and if I recall he is parting it out. He will also sell the whole thing to anyone interested. If you are interested I will dig out his name and number for you. Please email me if you are interested. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now