johnny38 Posted November 20, 2012 Share Posted November 20, 2012 any help dropped tiny washer down spark plug need help Link to comment Share on other sites More sharing options...
Phil 32DL6 Posted November 20, 2012 Share Posted November 20, 2012 any help dropped tiny washer down spark plug need helpTurn car upsidedown and shake. Seriously, how about one of those thin-shafted tools with a small magnet on the end. Link to comment Share on other sites More sharing options...
ply33 Posted November 20, 2012 Share Posted November 20, 2012 Turn car upsidedown and shake. Seriously, how about one of those thin-shafted tools with a small magnet on the end.If the magnet at the end of a rod doesn't work, removing the head on a '30s L-6 Mopar engine is pretty easy. Link to comment Share on other sites More sharing options...
JACK M Posted November 20, 2012 Share Posted November 20, 2012 I was at a tool store recently and bought a flaslight with a small magnet that pulls out from the leds and has about 2 inches of flex on it. Pretty handy. Link to comment Share on other sites More sharing options...
1936 D2 Posted November 20, 2012 Share Posted November 20, 2012 If it was a brass or stainless washer, they make a tool that has three or four wire gripper fingers at the end. It works like a choke cable. You push on the handle on the end and the fingers come out the other end and spread. Line it up with the washer (the hard part) and pull the handle back up the shaft allowing the fingers to grip the washer (hopefully). Good luck! Link to comment Share on other sites More sharing options...
Guest 1930 Posted November 20, 2012 Share Posted November 20, 2012 Suck it out with a vacuum Link to comment Share on other sites More sharing options...
JACK M Posted November 21, 2012 Share Posted November 21, 2012 What about it Johnny?Did you get it out? Link to comment Share on other sites More sharing options...
johnny38 Posted November 22, 2012 Author Share Posted November 22, 2012 What about it Johnny?Did you get it out? thanks guys for ur help try all ended up pulling valve panels off it got down in there some how but got it thanks again Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now