Jump to content


  • Posts

  • Joined

  • Last visited

Everything posted by johnny38

  1. hi all looking for a floor shifter 73 or 74 dodge challenger automatic
  2. hi all any have a shifter for a 73 or 74 dodge challenger automatic
  3. thanks dale, sort was thinking to much about ad
  4. 38 dodge D8 touring sedan 3rd owner bought on july 11,1938 have orignal bill of sale and id card from dodge dealer in illinois have all manuals and parts books WHAT CAR HAS FROM 1938 engine -218 6cly trans wiring engine and under dash oil breather air breather seats mohier front and back beige in color radio-not working heater - working daul wipers - working gauges - working door handles and cranks - all working had auto scissor choke not hook up has manual choke working all windows working no chips,cracks,vent windows all swing open, front vent crawl opens and closes WHAT NEW ON CAR exhaust system from manifold to tail pipe exhaust manifold gaskets oil pan gasket front brakes replaced with shoes not liners master brake cly. rebuilt front brake cylinders set of firestone 6.50-16 4 '' w/walls tubed set of shocks front and back stromburg EXP2 carb correct for 38 D8 stamped on carb plugs,wires ,rotor and cap trunk weather stripping gas,clutch and gas pedal speedometer rebuilt - 400 plus miles on it since rebuilt brake signal switch all lights head ,tail,brake ,gauges ,interior and reading lamp all working interior back seat excellent,front worn small hole ,head liner fading,back door panels excellent,front door panel and kick panels redone color off a little running boards excellent all chrome excellent no dents,scotches,pitting all on car none missing all elmbems front ,back and inside all correct with car NEEDS WORK car was painted 1993 pass side door faking pass side rear door chip front fenders chips weather stripping trunk support bracket missing SPARE PARTS set of 6.00-16 b/walls tubed 4 carbs 3 to be rebuilt 1 rebuilt fuel pump to be rebuilt brake shoes bulbs all 6volts for car fan belt and assorted other things all go with car $13,500.00 FINAL NOTE garage kept 2 yrs owned never seen snow nor rain runs,starts,drives excellent for a 76 yr old car you will not be disappointed great cruiser and a lot of thumbs up everywhere you go. for any questions email me at sciliansrock@yahoo.com
  5. thanks lp will do, will put it together tomorrow ill let you know how it goes thanks again johnny
  6. thank D2 and jp i have both on my car scissor choke is ready never hooked to carb if i go to that do i disconnect to manual choke cable to carb? thanks johnny
  7. hi all looking for a choke cable 1938 dodge D8 218 6cly stromburg carb thanks john
  8. hi all looking for a used mopar 340 small block
  9. hi all, looking for a 340 or 360 LA engine for a 73 challenger thanks all
  10. looking for a 340 or 360 LA engine for a 73 challenger
  11. hi all, just wondering is they any good way to find the rite air/fuel mix on my stromburg carb or is it that you just have to play with it to you think its rite any help would be helpful I'm sure all have diff ways carb was rebuilt timing good plugs,wires cap rotor points all new thanks johnny
  12. hi jack, jump the 2 wires from brake light switch, brake lights on getting new brake light switch as we speak thanks again so much for time and info much thanks johnny
  13. hi jack no brake lights when pedal down do i track down that wire to the tail lite parking lights all work fine
  14. hi all, would like to ask put test lite on wires to brake switch 1 shows total power to lite other shows very weak power is that correct or should they both show full power to test lite if so anyone know what problem may be. thanks johnny
  15. hi dodge thank you so much plate is on the way to steele thank you so much for ur help thanks johnny
  16. hi dodge yes the one side steel plate is on frame still i guess i have to take it off and send to them correct
  17. hi all, anyone know where i can get this rubber bumper steele has no clue mounts on from in front of car 1 for each side i think its call axle rebound pad lost 1 looking for 1 or pair any help
  18. hi all, looking for rubber axle rebound pad which bolts on frame in front tried steele rubber no luck any help thanks johnny
  19. hi all any help on fuel pump no gas getting to carb have fuel to pump but nothing going in to line up to carb blew out lines gas is coming to pump took pump off is the level suppose to real hard to push down or is suppose to work up and down freely any help welcome p.s. bowl on rear of pump was full thats john
  20. thank you keiser31 just avg silver will do hi temp any recemadtion who to buy from eastwood co i have dealt with before
  21. hi at i have a 38 dodge sedan bench seat should be the same ,you need a pic of the rod you pull up the slide seat front to back give me email ill take a pic for you john
  • Create New...