gfw2

try here https://www.autocolorlibrary.com/pages/1930-Buick.html#parentHorizontalTab1

Hi Morgan You might want to pull the manifolds to see if they made it into the cylinder head or into the engine as they have no problems getting by an open valve. George

Hi Mike I found the carb and manifolds i will separate the carb and get you some pictures. My son and grand kids have arrived for a couple days so it might be until sat. before i can get them apart. George

Mike i have found the pump,it looks the same except the fuel outlet on the fuel bowl side goes strait along the engine where as the one in your picture is facing you. Mine is NOS rebuilt and i also have a new Kanter rebuild kit in the package. I have at least two carbs one is complete with manifolds and air cleaner. I'll get you some pictures. George

Hi Michael i'll check my spare parts i think i have a couple fuel pumps, i also have a couple carbs. George

http://www.ebay.com/itm/1932-Buick-90-series-/182670799334?hash=item2a880731e6:g:j2QAAOSw4ERZbPF~&vxp=mtr on ebay now george

I could be wrong but the back of the truck looks very similar to a 34 ford pick up.

Try Donald he might have the headlight parts you need. Headlight Headquarters Phone: (781) 598-0523 Donald Axelrod owner Phone | (781) 598-0523

This is on eBay,its not mine but i have bought from him in the past. George http://www.ebay.com/itm/ORIGINAL-1930-BUICK-DRIVE-TRAIN-MOTOR-TRANSMISSION-REAR-END-/292033137785?hash=item43fe880c79:g:mokAAOSw2gxYqhYR&vxp=mtr

If no willing teenagers are to be found i have used an air chisel with one of the chisel's ground down to fit the slot in the screw, use plenty of penetrating oil then i put a pair of vice grips on the shaft and with downward pressure on the gun give it some short easy bursts and the vibrations help loosen the screws.

a couple more

Hi Mike sorry about the delay in getting back. The radiator does not want to come out of it's shell. Seems to be stuck around the pines thermostat soaking the threaded shaft now maybe i have missed a some other attachment point. Its loose at the bottom but not at the top. Sadly i found two cracks on the top tank. Best guess is there are more on the back in the same area.I dont know how bad your tanks are this is what mine are like. George

I use evaporust for most of my small parts but for the larger parts i use a 55 gal plastic drum with a molasses mixture of 10-1. 5 gals of molasses feed grade ($35.00)total last batch. I use the liquid from agway. Works much better in warm weather so i put it in a heated shed. It does smell and will attract unwanted guests. George

I got mine home from storage and will take it apart to see what it looks like out of the frame. George

http://www.ebay.com/itm/1930-Buick-radiator-shell-/192008552831?hash=item2cb49a017f:g:Kw8AAOSwx2dYD8H3&vxp=mtr Just saw this on ebay.

Hi Michael Ill check the one i have in storage that came with my 68. If i remember correctly its missing the bottom outlet. George

Hi Mike Inside to inside at the top of the B pillars right by where it meets the top wood cover (over the door) and if open the same at the top of the quarter panel behind the B pillar. Thanks George

Hi Mike The pictures were still there, it took me a while to to get back in as i haven't been on that site for quite a while. If you are near your coupe any time soon and can get me the distance between the doors at the top and bottom, front and back that would be a great help. Let me know if you are missing any other parts for your restoration. I have been gathering extra parts for mine for the last seven years and i'm going to try and trade for some of the parts i need,. Thanks George

Thanks Michael I had forgotten about those pictures. I'll go back and look. Thanks again for getting the measurements. George I'm starting to put together a list of chassis parts,brake parts and extra rims that i have and will be parting with also I'm also looking for a front bumper for my 30 and have 28-29 bumpers that i dont need and will part with. George

Thanks That would be great. At this stage measurements are more important than the pictures. George

It looks like you have found yourself a great place to have the do buisness. $1400 and that included replacing the trans seal. I hope you asked if they would do other repairs if needed. Some shops will do more than just what it advertises. George

Measurements between the A pillars and B pillars and in front of the rear seat Left to right. Just trying to get the width correct. Thanks George

Hi I'm trying to piece back together a 1930 model 68.I bought this years ago as a left over parts car and now it's time for me to put the body together .Only problem is it came without 90% of it's wood. If i can get some pictures of the complete sills with measurements (Inside and outside please) at front, rear and the cross sills . It would be a great help. Thanks George

Just saw this on ebay. its not mine http://www.ebay.com/itm/Vintage-license-plate-frame-BUICK-CLUB-of-AMERICA/112018670839?_trksid=p2045573.c100033.m2042&_trkparms=aid%3D111001%26algo%3DREC.SEED%26ao%3D1%26asc%3D20131017132637%26meid%3Dc15f14ca81054661ba3f00a4e5f429c4%26pid%3D100033%26rk%3D2%26rkt%3D8%26sd%3D282059438294

passenger door