junkyardjeff
-
Posts
2,049 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Posts posted by junkyardjeff
-
-
Found a late 70s version bed in stock.
-
3
-
-
Picked up this 1964 Monogram 40 Ford truck for the rims and hubcaps to put on the same era 34 Ford kit but if I can find a blue bed might not take any parts off it and leave it alone,was told the flatbed is from a 34 Ford kit and do have a later released red bed but hoping to find a correct blue bed. I have a unbuilt 34 coupe kit that I want to build as a early 50s hotrod using all early 60s parts but this truck is just too nice to take apart.
-
1
-
-
41 minutes ago, rocketraider said:
I've fought wasps, snakes, and a couple of territorial goats, but never had a tree fall while I was in a junkyard!
Moo-cow in a junkyard?
Yes they have cows.
-
We are restoring a 61 at work and the serial number tag on the steering column is the only tag on the car,there is no body tag like on all other GM vehicles with the trim and paint codes and other info.
-
Kind of windy in Ohio today but did not let that keep me from going,well while I was getting the wiper switch out of a 65 LTD 4 door hard top I heard two trees fall so I went to look at the cars in the more open areas for the other parts I needed. No parts to be found there and wanted to to the back lot that is more wooded but cut the trip short. Lots of old trees in that junkyard and many have fallen in the last few years and one tree fell and killed a cow they had so will try again another day.
-
I have a few rough ones that I repainted and added more detail to.
-
Working on the AMT 60 Ranchero that came with a big block and no shock towers so since I picked up a correct six.I cut the shock towers out of a Mustang and trying to get it to look more like a Falcon under the hood. The parts I used are not that detailed but will look more correct then the way it came.
-
4
-
-
Found most of the missing trim at a old junkyard yesterday and today while going through the garage I found a 2 speed wiper motor and wiring harness so all I will have to get is the switches. Also found door lock cylinders it was missing and will have they key made to fit them,found a good section of the trunk floor it needs and will cut it out in a couple weeks.
-
1
-
-
I found hoods for the Dodge and Plymouth and the missing parts for the Lincoln,still need to find a rear bumper for the Buick and the 67 Galaxie I picked up after I first posted. The 58 Chevy got donated to a guy at work to fix one he has.
-
2
-
-
Checked my recent 65 Galaxie purchase and it does have those horrible one speed wipers so off to the junkyard to get 2 speed parts over the winter.
-
It only took a couple drives in the rain to get me to convert to two speed wipers,those single speed wipers are terrible with light rain.
-
My recent 65 Galaxie purchase is the third 60s Ford that had one speed wipers and was wondering was it just Ford or did others offer it too. Its not going to stay in it and will have the parts over the winter to go to two speed and washer.
-
i think has those horrible 1 speed wipers and no washer so that will change before it hits the road.
-
I do have a 4 door that can be a donor for the frame but I think it can be repaired,I need to see if patch panels are made for the quarters but have all winter. I will most likely save it as I know there are none locally that are any better that are reasonably priced,I have seen people trying to get over 3000 for a 4 door with a rusty frame so I think I done real well for 500 dollars.
-
I have seen the key codes stamped on the lock cylinders so maybe it will be stamped on the glovebox lock cylinder.
-
1
-
-
I planned on using it for a drivetrain donor on a better body but the frame is not as bad as I initially thought so if I do not find anything over the winter I will try to save it. The floors are good and the rust in the trunk floor is near the rear body mounts and found one in the local old junkyard that is good in that spot snd found one in another junkyard that has the trim pieces its missing and will be grabbing those parts next weekend.
-
This car came from the factory painted Acadian blue with a blue cloth and vinyl interior but now has a red vinyl interior and is in primer,30 years ago I seen a mint one sitting in front of a union hall in Springfield Ohio in that color and interior so I looked at the title and that is where this car came from. I hope its not the same car as the one I seen years ago was very mint and looked to be a 20,000 mile car,the mileage on it is a little over 49,000 miles and the numbers are all in a straight line so it could be correct but it had a rough life and can not imagine someone doing that of its the same car. If it is someone turned it into a daily driver and ran it to death.
-
Had one for my first car and have wanted another since it got totalled in 1980,I had a wagon and have a 4 door but I have to have another 2 door hard top. Its kind of rough and hope to find another rolling shell but ot could be fixed if I can not find another that is better. 390 4 bbl and power steering,it has the original heads and intake but not sure of the block since it has a later C-6 trans and a later harmonic balancer.
-
2
-
-
A local junkyard has a 40 Dodge with most of the front clip still there.
-
I personally think all period accessories should be allowed without any point deductions since technically the dealer installed are not factory installed,yes I know they are not manufacture approved but still did not come off the assembly line with them so to me no big deal.
-
1
-
-
I would try to find another part first,since alot of force was needed to brak the part it might not be straight.. We havw a 55 Dodge convertible at work that has some parts that have been welded and can not get the top to fit right and I think ots from the once broken parts.
-
I have a 63 that I will be working on that the top blows up like a balloon going down the highway,they want me to install a new top since they think it was installed wrong but those years do not have a listing made into the top to keep that from happening so I told the manager that the new top will eventually do it again. It has to be a cloth top and those are worse for doing that so does anyone know if there is a solution out there,I kind of have one in mind but not sure if there could possibly have the top material get pinched when the top folds down with the material close to the top frame.
-
Got it out of a lengthy storage and will be hunting parts soon.
-
4
-
-
I do not have period tools for each older vehicle I own but most of my tools are over 25 years old so that should be good enough.
-
2
-
Another early 60s model
in Memorabilia, Toys, Art, Signs, Clothing and Printed Material
Posted
I can find parts for the real cars easier then for some models,still trying to find some parts for a AMT 65 Buick Wildcat. Can get plenty of parts for the 66 since its been released again,the 65 molds were modified for the 66 so no more new ones.