Jump to content

Leif Holmberg

Members
  • Posts

    4,358
  • Joined

  • Last visited

Everything posted by Leif Holmberg

  1. Thanks heidigirl.After all I found a Set at Vintage Auto Parts inc. Leif in Sweden.
  2. Thanks sixpack 2639.After all I found a Set at Vintage Auto Parts inc. Thanks Leif in Sweden.
  3. Thanks bradsan!Last week i found a Set at Vintage Auto Parts inc.I have not contact your tip,he had a homepage but you had to contact him by phone or E-Mail. Thanks Leif in Sweden.
  4. Hi.I am restoring a Buick 1925 std and I am loocking for a set of Piston Rings,have found out that Olds 1932-1935 mod.L32-35 has a bore 3" and rings 1/8"thick.Need help where to find a set oversize 0,015-0,025" of these.Thanks Leif in Sweden.
  5. Wanted a set Piston Rings 3" oversize 0,015-0,025"x1/8" Or any help where to find a set.Buick 1925 std.Thanks Leif in Sweden.
  6. Wanted set of Piston Rings Buick 1925 std.Bore 3"+overzise 0,015-0,025"x1/8.Or any help where to find a set.Thanks Leif in Sweden.
  7. Need help where to find a set of Piston Rings bore 3" oversize 0,015-0,025 x1/8" ,Thanks Leif in Sweden.
  8. Need help where to find Clip Back Window Reveal Molding Lower 11.209 4663774 Can be used on 1955-1956 Century mod 43 and 63 and 1956 mod.63D.Thanks for any help.
  9. The year is 1924 or 1925,it looks like a 120 or128 inch weelbase.What i can see it`s more luvres than 24, therfor i think it is 1924 mod 49 or 55 alt.1925 mod 49 or 55.
  10. 1956 Ser.40 Special and Ser.60 Century have same propeller-shaft on all modells. 5.441 no 1388712.(Fit only 1956)
  11. Switches on carburator(vacum) seems to start 1939 and was used to 1960.If your friend don`t have it on his-her car they have done what you are thinking to do.(You can use both together if you want. 1956-76C in Sweden.
  12. Where can I bay a new Joint-universal to my 1956 Dynaflow 5.548-5670292. I have been looking at a lot of Internetsites but cant find this Joint-universal.Is it possible to have it redone in USA.Thanks Leif in Sweden.
  13. Help identify a Dynaflow-53-54-55, stamped 010 uppside and T77 downside on Flange driver side in front of high accumulator.Are there any Internet sites to find about Dynaflowidentitet.Grateful for all help.Leif in Sweden. 1924-35 1925-25 1956-76C
  14. Take a look at BCA-GENERAL 06/22/04 maybe you can find a solution.
  15. Anybody know if it`s possible to change heads from castno.1166349-4 on a 1955 Roadmaster to castno.1168930 from 1956.
  16. Deskribe exaktly how to do,if possible.I am wonderig about the inner retainer and how do you got the ball in right position (axially movable and located). 1956 Roadm.Conv.
  17. No you can´t use this engine becuse of the different pattern.1956 is a 322 engine and 1957 is 364 engine.But you can use an engines from 1956 Super or Roadmaster that´s the same as Century.You can even use a 1956-Special but you lose 35HP.
  18. You can see a lot of them on www.conceptcarz.com search buick.
  19. 0.519 no.1327902. 1936 thru 1953-40;1940 thru 1949-50(for mech.valve lifters) no.1327903. 1936 thru 1942-60-90; 1936 thru 1940-80; 1940 thru 1947-70; 1948-70 D.F. up to engine 5192693.
  20. My book says 6.203-1394793 kit King Pin Replacment ,1934 thru 1942-40;1937 thru 1942-60;1940 thru 1942-50-70;1946 thru 1956.Leif in Sweden.
  21. Take a look at this site 1956 Buick (Robert Budd)everything about 1956 Buick you need. http://gr8soft.com/56Buick/index2.html
  22. 4.164 133518(3) Spring Clutch DF.4.169 1391677 Drum Brake ,High and Low (inkl.oil seal)Some of 1953-1954 DF 4.126 1346942 Carrier,converter Second Turbine 1953 DF. 4.162 1335187 Gear Low Range Reaction.1948-1954 DF 4.162 1170364 1955-1956 DF. 4.403 Shaft transmission Main. 4.424 Pump,front oil (includes body and gear.)1959 3T.
  23. If you hang your trunk lid up and done with string or wire from the inner construktion(near the middle) ,you will have a few millimeter extra to put the material between the trank lid and the construktion.
  24. Hi.If you bay a mirror from Cars take a look at the patten and compare with the mirror before you drill the holes.When I bouth my mirrors from Cars I got a patten 1/4" to short between the holes.Leif in Sweden.
  25. 1947 Engine and Serial no.1947 Engine Number Continued from 1946 Frame or Serial number starts at 1-4524131 Flint.2-4530001 Cal.3-4542001 Linden.4-4536001 Kansas City.Hope it will help you.
×
×
  • Create New...