Robert Winters

Hi Edwin, What is the shape of these manifolds , are the level and smooth, any welds ? and how much are you looking for. Can you send pictures.

Do you have a Marvel carburetor ?

Are you getting an original gravel shield or had a new one made?

How old do you think the gas was sitting in the tank? The gas in my tank is about 3 years old and I’m thinking of draining my tank What timeframe is considered bad gas?

I got rear roller bearings and rear wheel felt seals from Jim for my 34 68C phaeton Vintage Motion (231) 499-8211 343 MEGUZEE POINT ELK RAPIDS MI, 49629 Jim was very knowledgeable and good to talk with. If he doesn’t have what you need he will help you figure it out. HTH Robert

Hi Bill I spoke to Jim at Vintage Motion (231) 499-8211 for updated Hyatt roller bearing and felt seals jim@ensignbearing.com https://www.vintagepartsource.com/index.htm 343 MEGUZEE POINT. ELK RAPIDS, MI 49629 I also spoke to Steve and Mark at Southshore Bearing Distributors for a similar roller bearing model ( my dad used to go here for all his bearings ) office (617) 471-7800 info@southshorebearing.com https://southshorebearing.com/ 111 Copeland Street. Quincy, Massachusetts 02169 Both styles of newer roller bearings seem to match the original specs and don’t have the same heat and wear issues I was told. HTH Robert

I just got a pair of felt seals from Vintage Motion out of Michigan. Call Jim (231) 499-8211

Just found a copy of Vintage veteran brake repair on eBay, hoping it has a good section on 34 Buick cable adjustment steps. Took off rear hubs and found one Hyatt roller bearings #7147 was broke, took some research but found two bearing supply places with new upgraded roller bearings for rear hubs. Newer bearings have 15 rollers while original had 22 rollers, they said this newer design helps with heat issues

Does anyone know best way to test the control valve and power cylinder I’m working on my mechanical brakes and need to see if the diaphragms are good and if not how to repair Thanks Robert

Here is a jack I have in my 34-68C. Not sure if it’s original. My dad had several jacks he collected over the years. Probably from a Hershey meet

Good info. What do you recommend for antifreeze Is Peak 50/50 ok to use this is for my 1934 model 34-68C

Need OEM/NOS oil filter and other tune-up parts

Hello. I’m not sure which forum group to post my question on? Can someone please inform me on how I can ask a question to purchase an OEM /NOS oil filter for my 1934 Buick 68c. I’m having a hard time online with any parts stores sorry if this post is in the wrong group

Hi Przemek Here is a pic of my 34 Series 60c Convertible Phaeton

Just towed my dads 34 Buick Phaeton Series 60 convertible along with lots of parts across the country. Need to repair the rear end and adjust the mechanical drum brakes Interested in any Buick clubs in Southern California area along with contacting any good mechanics This Buick has been in my family since 1969 and my goal is to fix it up a bit more from its present running condition Thanks Nathan