den58
-
Posts
50 -
Joined
-
Last visited
Content Type
Forums
Gallery
Events
Everything posted by den58
-
I will look at the ones I have and let you know. Have a nice night Dennis.
-
Is that the molding on the lower front fender?
-
Will a 1937 exhaust manifold from a 248 cubic inch fit a 1940 248 cubic inch motor
-
st 8 motor #43315945 thank dennis
-
that post is old steel not den58
-
yes mine are off i still have them
-
35 buick
-
looked at wrong list
-
does 7401 fit 1940 buick can knot read year thanks dennis
-
1953 Buick Special radiator, in desparate need!
den58 replied to Phatthawg's topic in Buick - Buy/Sell
do you have part number -
should be easy to make one make one from thin cardboard as a sample then transfer to your etal stock or have it maid hope that helps! dennis
-
would like to see parts befor $$ i am from long island thank you dennis
-
steering wheel &spedo $$ thank you dennis
-
hope it is the right part he does take parts back some times
-
use a center pumch on spindel and stud lock i did this on my 40 hope this helps dennis
-
1953 C-body vent window assemblies needed
den58 replied to Pete Phillips's topic in Buick - Buy/Sell
pete see you e her carts wen s ecoulld you help me with part numbers a good friend of mine left me her car i have two sets thankyou dennis -
hello and welcome you can make one from brass tubing peen over one end all around on end two cut twist lock hope this helps dennis
-
year of car i have some radios most of the time it is the capators hope this helps dennis
-
test vaccum advance my 40 was that good luck dennis
-
1955 Buick 2Door Hardtop Vent Window Frame (Driver side)
den58 replied to Belvedere_fr's topic in Parts Wanted
do you have part number good luck dennis -
do you have casting number
-
i opend @ cleaned @ lubed with white grease on my 1940 buick good luck dennis
-
Welcome, a friend has 15 59 Buicks he used back up lights from 64/65 ? mustang hope this helps Dennis
