TCAuburn Posted January 30 Share Posted January 30 I'm trying to locate a working master cylinder for my TC (89 16V). I've exhausted what I could find and am needing help. The shop replaced the master cylinder with another one I had (it was working before the car was parked for a LONG time). The shop could use a rebuild kit (gaskets are shot on the one I had supplied). Does anyone have any ideas on what might be possible to get the car back on the road? Thanks for any help or direction Link to comment Share on other sites More sharing options...
marty14 Posted January 30 Share Posted January 30 what do you need? 1 04464006 1 KIT, Reservoir 2 04464030 1 SPACER, Brake Booster Mtg. - 04464365 4 BOLT, Spacer Mtg. 4 04463982 1 GASKET, Brake Booster Mtg. 5 04464001 1 KIT, Acumulator 6 04464008 1 CAP, Reservoir 7 04464002 1 KIT, High Pressure Hose 8 04464012 1 KIT, Accuating Assembly, (Included Valve Block) 9 04464009 1 KIT, Low Pressure Hose 10 04464017 1 KIT, Seal 11 04464003 1 BOLT, Banjo 12 04464011 1 PUMP ASSEMBLY 13 04464005 1 SWITCH, Pressure Warning 14 04464004 1 INSULATOR PACKAGE 15 04464007 1 BRACKET PACKAGE 16 04464010 1 CLIP 17 04464013 2 SENSOR ASSEMBLY, Frt. Wheel 04464028 1 BRACKET, Frt. Wheel w/ABS Sensor Supt. 18 04464014 2 SENSOR ASSEMBLY, Rear Wheel 19 04464015 1 SPACER, PACKAGE 20 04464016 1 CONTROL MODULE ASSEMBLY Link to comment Share on other sites More sharing options...
mensanguy Posted January 30 Share Posted January 30 Do the Hemi-conversion! Link to comment Share on other sites More sharing options...
mensanguy Posted January 30 Share Posted January 30 There are currently SIX available on E-Bay for $2-900.00 Link to comment Share on other sites More sharing options...
TCAuburn Posted January 30 Author Share Posted January 30 Do you know if anyone from here has any or someone that can stand behind what they send? The two I got from Ebay were faulty. I'm hesitant to keep throwing money that way without knowing if it will work but may end up having to do that. (I have to have a shop work on my cars because I know I wouldn't be able to fix it myself!) I will look at E-Bay again. Thanks!! Link to comment Share on other sites More sharing options...
TCAuburn Posted January 30 Author Share Posted January 30 Where would I find information on the hemi-conversion? Link to comment Share on other sites More sharing options...
Hemi Dude Posted January 30 Share Posted January 30 50 minutes ago, TCAuburn said: Where would I find information on the hemi-conversion? "From me". Do you know how to receive & send a PM on this site? I have sent you a PM. Link to comment Share on other sites More sharing options...
TCAuburn Posted January 31 Author Share Posted January 31 Hello Hemi Dude, It looks like the seal between the master cylinder and the accumulator assembly is blown (as best the mechanic and I could tell). We are going to try and get one possibly made that will fit that specific application. (We have three assemblies all together right now.) The seak seemed to work but when they took it out to test it wouldn't hold pressure and was squirting out from the master cylinder connection. If this does not fix the problem i will be in contact with you in a couple of weeks (I am going to be out of touch for a little bit.) Thanks to all for the information!!!!! 1 Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now