Rayfield Float sight glass

[dl456]

Hello,

Anybody have a source for the 5/8 round sight glass lense on the carburetor.

I have made two, but I prefer not to make another if something is available.

Thought about Lexan but I don't know how it would hold up to the fuel over time. 

Thanks,

Dennis

[mikewest]

I googled BOILER SITE GLASS TUBING and its all over the board in 5/8 and 1/2 inch

[1912Staver]

I think he needs a 5/8 diameter , flat disk of glass rather than 5 / 8 glass tubing.

[mikewest]

1 hour ago, 1912Staver said:

I think he needs a 5/8 diameter , flat disk of glass rather than 5 / 8 glass tubing.

My mistake.....smile

[Bhigdog]

Machine tools use oil level glass about that size. I'll let your fingers do the google walking among machine tool re-builders.  Failing that, McMaster lists sight glass discs down to 1". Diamond discs and/or wheels are dirt cheap from Ebay or Amazon and will make short work of that job .................bob

Edited January 11, 2023 by Bhigdog (see edit history)

[dl456]

Thanks guys,

I have some of the 1” discs and that’s what I did before.

I was hoping they might be available.

Dennis