Parts wanted

[Gary56]

I have a 1929 Graham Paige 615 and I need help with the replacing the light switches in the steering wheel.  Can anybody tell me where I can get these switche levers that are on the steering wheel.    Gary56

Edited December 24, 2022 by Gary56 (see edit history)

[Larry Schramm]

32 minutes ago, Gary56 said:

I have a 1929 Graham Paige 615 and I need help with the replacing the light switches in the steering wheel.  Can anybody tell me where I can get these switches?    Gary56

 

Do you have a picture of what you are looking for?

[jdome]

What do you actually need? the lever that you put your fingers on ? Some of those were made of pot metal that often break. Some were a metal tab with Bakelite knob on the end. Those also break off. The lever is attached to a rod under your horn button. The rod goes down through the center of the steering shaft to the switch box with contacts at the bottom of the steering gear box.

Edited December 24, 2022 by jdome (see edit history)

[DFeeney]

I know a machinist that took a piece of stainless bar stock and machined it down to make the lighting switch handle and silver soldered to the plate under the steering wheel.  It looked pretty good  .  He actually made two ( one for each side) and they  both looked alike. 

[Mark Gregush]

as a reminder.

STOP AND READ
Technical questions require you provide a complete topic title and a full description including (when applicable) year, make, model, and technical issue.  Photos are highly recommended.  Topics that do not follow the forum rules will be deleted without question.

[Frank DuVal]

Right. I just happened to read this topic, usually never open the ones without description. You miss a lot of opportunities for people who know Grahams to respond to the question. This rule is to help people help people.👍