1933 Plymouth Passenger Side Door?

[Ken Felton]

I am pretty sure this is based on the guidance Keiser31 and Auburnseeker shared with me.  A confirmation would be helpful.  Thanks

[keiser31]

Yes.

[Scott Bonesteel]

Guaranteed 33 Plymouth or Dodge.  Only thing similar is the 34 Mopar doors, but that would have an outside hole for the door lock and the window crank and door handle on the inside would be offset instead of level with one another.  Finally, it is subtle but the 33 doors are more vertical on the front edge than the 34s.

[thehandleman]

give a closeup of the handles and I can confirm plymouth or Dodge

[Scott Bonesteel]

Not particularly clear, but the ridges on them look more like Plymouth than Dodge.

[thehandleman]

I just zoomed in on my smart phone there definitely 33 Dodge handles or well they used same handle inside opener 33-34 but since OP have determined its a 33 Door then I am ready to say 1933 Dodge DP Sedan door is my guess

plymouth Interior handle design has the center line where dodge is on outside

Cheers

[Ken Felton]

Thanks Scott Bonesteel and Thehandleman for the review and comments.  I provided pictures of the close of the handles, but it sounds like that is settled.

[thehandleman]

Thanks for the thanks, Definitely Dodge Handles

Good luck!

[Scott Bonesteel]

With the closeup I agree, Dodge handles.

[Scott Bonesteel]

Since the id is confirmed this is 33 Dodge passenger door, it should also fit the 33 humpback panels and the 34 first series humpback panels (which used the 33 doors) but not the 33 or 34 'express' (pickup), which had a rounded corner on the upper hinge side.

[Ken Felton]

Thanks so much thehandleman and Scott for sharing your knowledge with me.