Servin Posted August 31, 2021 Share Posted August 31, 2021 Hello guys I own a 1926 Buick standard I put up a post on wanted parts but didn’t get much help so I put it in this topic. I’m looking for the passenger door window and door mechanisms..window frame that goes on the door four pieces…I need a radiator bypass block off…this screw that goes in the back of the distributor …accelerator pedal seems like you can screw it on and off….and suspension straps left and right…if possible the choke bezel that goes on the dash. If you have any leads please message me thank you stopping by hope to hear from someone. 1 Link to comment Share on other sites More sharing options...
michealbernal Posted August 31, 2021 Share Posted August 31, 2021 Bobs Automobilia should have at least some of these parts. He not only has new parts but some used ones also. Just because you don't see it in his on line catalog does not mean he doesn't have it. 805 434 2963 2 Link to comment Share on other sites More sharing options...
Brian_Heil Posted August 31, 2021 Share Posted August 31, 2021 This is a small screw with part of the shank not threaded and a small spring is held under the head. Tighten it down until the threads stop and the spring is slightly compressed. Sorry I don’t have one or have yet to find one in my stash. 1 Link to comment Share on other sites More sharing options...
Hubert_25-25 Posted September 1, 2021 Share Posted September 1, 2021 Servin, This is what the distributor hold down screw looks like. I made the barrel from a piece of tubing and I silver soldered a washer to it. I made 4 at the time. There is a picture showing the washer and bolt that I used to hold the 2 pieces as I soldered it. I don't know what a "radiator bypass block off" is. You will need to provide a picture. Bob's has the accelerator button that screws on the end of the accelerator rod. Bob's has the dash plate for the choke. I do not know what "suspension straps" look like, so another picture would be helpful. Hugh 3 Link to comment Share on other sites More sharing options...
Servin Posted September 6, 2021 Author Share Posted September 6, 2021 On 9/1/2021 at 4:09 PM, Hubert_25-25 said: Servin, This is what the distributor hold down screw looks like. I made the barrel from a piece of tubing and I silver soldered a washer to it. I made 4 at the time. There is a picture showing the washer and bolt that I used to hold the 2 pieces as I soldered it. I don't know what a "radiator bypass block off" is. You will need to provide a picture. Bob's has the accelerator button that screws on the end of the accelerator rod. Bob's has the dash plate for the choke. I do not know what "suspension straps" look like, so another picture would be helpful. Hugh Hugh, I’ll be sending you a few photos of the straps I was talking about and the block off through a message thank you for reaching out. Link to comment Share on other sites More sharing options...
Brian_Heil Posted September 7, 2021 Share Posted September 7, 2021 I found a couple of these in my spare parts PM me if interested Thx! Link to comment Share on other sites More sharing options...
Mike Mowen Posted March 2, 2022 Share Posted March 2, 2022 Do you need a radiator or hood? I have both. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now