1926 Buick need help hunting parts

[Servin]

Hello guys I own a 1926 Buick standard I put up a post on wanted parts but didn’t get much help so I put it in this topic. I’m looking for the passenger door window and door mechanisms..window frame that goes on the door four pieces…I need a radiator bypass block off…this screw that goes in the back of the distributor …accelerator pedal seems like you can screw it on and off….and suspension straps left and right…if possible the choke bezel that goes on the dash. If you have any leads please message me thank you stopping by hope to hear from someone. 

[michealbernal]

Bobs Automobilia should have at least some of these parts.  He not only has new parts but some used ones also.  Just because you don't see it in his on line catalog does not mean he doesn't have it.  805 434 2963

[Brian_Heil]

This is a small screw with part of the shank not threaded and a small spring is held under the head.  Tighten it down until the threads stop and the spring is slightly compressed.

 

Sorry I don’t have one or have yet to find one in my stash. 

 

 

[Hubert_25-25]

Servin,

This is what the distributor hold down screw looks like.  I made the barrel from a piece of tubing and I silver soldered a washer to it.  I made 4 at the time.  There is a picture showing the washer and bolt that I used to hold the 2 pieces as I soldered it.    

 

I don't know what a "radiator bypass block off" is.  You will need to provide a picture.  

 

Bob's has the accelerator button that screws on the end of the accelerator rod.  Bob's has the dash plate for the choke.  

 

I do not know what "suspension straps" look like, so another picture would be helpful.  

 

Hugh

[Servin]

On 9/1/2021 at 4:09 PM, Hubert_25-25 said:

Servin,

This is what the distributor hold down screw looks like.  I made the barrel from a piece of tubing and I silver soldered a washer to it.  I made 4 at the time.  There is a picture showing the washer and bolt that I used to hold the 2 pieces as I soldered it.    

 

I don't know what a "radiator bypass block off" is.  You will need to provide a picture.  

 

Bob's has the accelerator button that screws on the end of the accelerator rod.  Bob's has the dash plate for the choke.  

 

I do not know what "suspension straps" look like, so another picture would be helpful.  

 

Hugh

Hugh,

I’ll be sending you a few photos of the straps I was talking about and the block off through a message thank you for reaching out. 

[Brian_Heil]

I found a couple of these in my spare parts 

 

PM me if interested 

 

Thx!

[Mike Mowen]

Do you need a radiator or hood?  I have both.