More on ABS wheel sensor cables

[Blue90]

Cable on far right is from an '88 Olds 98 front, 39".

 

Cable to left of that is a '90 Reatta front, 43".

 

Second cable from the left is a '90 Reatta rear, 31".

 

First cable on the left is a '90 Cadillac Fleetwood front, 39".

 

Note that although the Olds front cable is 4" shorter than the Reatta's, the alignment of the hole/barrel is similar.

 

The Caddy front has the same alignment of the hole/barrel as in the Reatta rear, although 8" longer.🤔

 

 

[padgett]

I thought the Caddy sensor was longer than the Reattas - hits the reluctor wheel unless a washer is added.

[bnaatds]

Being new to the Reatta world, I see that many of the ABS wheel sensor threads/posts are older. Does anyone have an update on wheel sensors? How do you find them and does anybody have them? I need a front driver side...

[bnaatds]

I was also wondering if anybody has ever tried a Cadillac Allante sensor? I know it was a completely different system (Bosch?) but the knuckle and CV joint appear to be the same part numbers so it would make sense that it would physically fit?

[DAVES89]

If you just cut you abs lead you could try this. Cut it completely and repair it using a coaxial cable repair kit for your TV. That is all the cable is anyway...

[Jim]

I have both front and rear good used or reconditioned sensors.

[bnaatds]

Thanks Jim, I will send you an e-mail.