Jump to content

1928 Buick.

Rod Miles

Recommended Posts


BOB'S Automobilia stocks them in sizes from 1 3/4"-3 3/4". Depending on your application. I believe they are also available from McMaster-Carr. Yes, that is where I bought new ones for my 1925 Standard and 1925 Master. I chose MMC because they usually have same day shipping and get then in about a day or 2.

Edited by dibarlaw (see edit history)
Link to comment
Share on other sites

To prevent a cracked exhaust manifold be sure to use the correct type beveled flat washers under the manifold nuts. I even lightly grease both sides of my manifold gaskets. Watch the fastener torque as well. The hardware must allow some thermal expansion during use.

  • Like 1
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Create New...