harmonic damper.

[handmedownreatta]

i have to change my harmonic damper so i guess i need to change that sensor too.can the crank seal be changed from the outside?

[2seater]

It is installed from the outside of the front cover so it should be possible to R&R in the car. Have not done so on a Reatta but have on implement engines

[D-a-n-i-e-l]

Yes, it has to be changed from the outside...

[handmedownreatta]

i bought a dorman from autozone.i didn't change the seal since this balancer has puller holes and it would be easy to pull again.btw i wasn't able to put that damper back on since the dorman balancer sticks out too far.i may put some washers behind the bracket later.

[padgett]

I've changed the dampner on a curb before. I set the breaker bar on the concrete and hit the starter to loosen (warning is dangerous).

[handmedownreatta]

On 5/30/2020 at 8:41 PM, handmedownreatta said:

i bought a dorman from autozone.i didn't change the seal since this balancer has puller holes and it would be easy to pull again.btw i wasn't able to put that damper back on since the dorman balancer sticks out too far.i may put some washers behind the bracket later.

1/8 inch washers was enough to put it back on.