39232pb Posted August 30, 2019 Share Posted August 30, 2019 Will any other rear fenders fit a 32 Plymouth pb coupe, is the radius the same? Link to comment Share on other sites More sharing options...
39232pb Posted August 31, 2019 Author Share Posted August 31, 2019 What I'm asking is are there any other fenders (ford, chevy,...) that have the same radius as the pb plymouth does Link to comment Share on other sites More sharing options...
nickelroadster Posted August 31, 2019 Share Posted August 31, 2019 I seriously doubt that anyone has looked at this before. It would probably be easier to just get new Plymounth fenders made. Link to comment Share on other sites More sharing options...
Walt G Posted August 31, 2019 Share Posted August 31, 2019 Do you know of anyone that has a 1932 DeSoto that you can look at just to compare and measure , not that DeSoto fenders are any easier to find. I do know that the 1932 Plymouth and 1932 DeSoto shared the same body (sheet metal stampings, top irons, seat frames and cushions) for their 2 door convertible sedan, but not if they shared any other parts . Perhaps the 6 cylinder Chrysler? Have you asked this question of the Plymouth Owners Club? Link to comment Share on other sites More sharing options...
39232pb Posted August 31, 2019 Author Share Posted August 31, 2019 I have fenders but the bottoms of the rear of both are rusted off, not sure how to add and shape new metal to them, i will check with the Plymouth owners club thank you Link to comment Share on other sites More sharing options...
32plywood Posted August 31, 2019 Share Posted August 31, 2019 31pa and 32 pb same rear fenders coupe/convertible/roaster. also desoto is the same 31 and 32 --- sedans I think are same curve but inside edge for bolts are different and not as wide as the coupes --- I may have a rough set for a coupe 1 Link to comment Share on other sites More sharing options...
39232pb Posted August 31, 2019 Author Share Posted August 31, 2019 Does anyone make fenders or patch panels for these cars Link to comment Share on other sites More sharing options...
32plywood Posted August 31, 2019 Share Posted August 31, 2019 look under the plymouth section for some one building fenders 1 Link to comment Share on other sites More sharing options...
keiser31 Posted August 31, 2019 Share Posted August 31, 2019 I have a couple of rear 1931 DeSoto fenders for patch panels only....pretty cheap, but shipping will cost. Link to comment Share on other sites More sharing options...
39232pb Posted August 31, 2019 Author Share Posted August 31, 2019 Heres the Drivers side Link to comment Share on other sites More sharing options...
39232pb Posted August 31, 2019 Author Share Posted August 31, 2019 Passenger side Link to comment Share on other sites More sharing options...
PB_Coupe_32 Posted December 6, 2020 Share Posted December 6, 2020 Hello, I have an original 1932 Plymouth PB Coupe . I have a set of rear fenders. If interested, I would be willing to sell them. I can add pictures if you are still interested. The original steel fenders need sand blasted due to some rust, but might be what you are looking for. Thanks, Peter B. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now