Jmsanch Posted October 3, 2018 Share Posted October 3, 2018 !940 Pontiac Deluxe 28. Finally got everything back together, and fired the car back up. A few tweaks to the carb, and the engine sounded pretty solid. Did a little walk around the car and noticed, crap a puddle of coolant on the ground. Opened the hood, and sure enough, looked like it was leaking from the weep hole. Up till not I really haven't had any issues finding parts for this car, well until now. What I've found is mostly kits and pumps for the 6 cylinder, this is of course the straight 8. Are the 6's water pump compatible, or does anyone know a good source for a pump? I haven't taken the pump apart yet. Thanks, Joe Link to comment Share on other sites More sharing options...
JFranklin Posted October 4, 2018 Share Posted October 4, 2018 If you found kits you might as well just get one and do the rebuild on your pump. Link to comment Share on other sites More sharing options...
Jmsanch Posted October 4, 2018 Author Share Posted October 4, 2018 The kits I have found are for the 6 cylinder, so not sure that would work. Link to comment Share on other sites More sharing options...
PONTIAC1953 Posted October 4, 2018 Share Posted October 4, 2018 1937 to 1948 pontiac engines, both 6 & 8 used the same water pump EXCEPT 1939 & 1940 pontiac 6, according to my pontiac master parts catalog, what the difference is, i don't know. 1 Link to comment Share on other sites More sharing options...
Jmsanch Posted October 4, 2018 Author Share Posted October 4, 2018 Ok I think I found one on Ebay that should work. I saw one for the same year, but it had an extended shaft, and said it would fit the 28. Do you know much about that type of pump? I didn't get one one, more out of curiosity. Link to comment Share on other sites More sharing options...
Bloo Posted October 5, 2018 Share Posted October 5, 2018 (edited) There is some information on Pontiac water pumps here: http://www.earlytimeschapter.org/waterpump1.html http://www.earlytimeschapter.org/waterpump2.html That page doesn't render properly for me, but here is an interesting part: Quote Third generation pumps In 1938 the location remained the same, but the pump was redesigned as already described with a sealed ball-bearing and carbon seal assembly. Although there were numerous subtle changes and various service parts listed for use; it remained essentially unchanged through 1948 with 1 notable exception. The 1939/40 six cylinder engines used a unique water pump. This was due to the fact that either engine was available in the Deluxe Series 26 or 28 models riding on the same 120” wheelbase. Prior to this, the six cylinder models were always shorter from the cowl forward, maintaining the relationship between fan and radiator with the shorter six cylinder engine. In 1941, with the advent of the “engine option”, Pontiac mated fan shrouds with the six and eight cylinder engines, thus eliminating the fan clearance issue regardless of which Series car the engine was installed in. Edited October 5, 2018 by Bloo (see edit history) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now