Dsquared Posted July 22, 2018 Share Posted July 22, 2018 replacing the hood ornament on a 35' PJ 2 door Sedan is there a best 'approach' to get in and underneath, removing the 'broken' one, and to clean and install the replacement? Like many other things its a very tight space. any advice,direction is appreciated Link to comment Share on other sites More sharing options...
Guest Posted July 22, 2018 Share Posted July 22, 2018 Can't help you with the bolt access but as far as cleaning an intricate piece like that, I find spray oven cleaner works best. Won't harm the plating. Let it sit for 10 minutes or so, then use a toothbrush on it. Rinse, good as new. Link to comment Share on other sites More sharing options...
keiser31 Posted July 22, 2018 Share Posted July 22, 2018 I hate to say it, but I think you may have to move the radiator out of the way to access the mounting bolts. Link to comment Share on other sites More sharing options...
TomP Posted September 9, 2018 Share Posted September 9, 2018 Dsquared if your interested in passing your old Hood Ornament regardless of condition I would be interested. Thanks Link to comment Share on other sites More sharing options...
Scott Bonesteel Posted September 11, 2018 Share Posted September 11, 2018 Tom, keep in mind that a 35 ship won't fit a 34 shell. Look similar but lots of differences. Biggest difference is that the front of the 35 fits into the stainless trim on the sides of the grille, while the 34--even on the later series with the stainless trim around the grille--sits up above, independent of the grille trim. Maybe you just want a shelf ornament, but thought I would point that out. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now