pgb123 Posted April 5, 2018 Share Posted April 5, 2018 I am looking for both the right and left front fender spears for my 1941 Buick Special, model 41, 4 door sedan. Does anyone make reproduction ones? I have had no luck with Salvage yards in Hemmings Motor news, so if there is a yard that may have these parts, please pass on the contact information. thanks Link to comment Share on other sites More sharing options...
Dynaflash8 Posted April 5, 2018 Share Posted April 5, 2018 I'll probably have a pretty good pair in about six months. My car is going to be painted, and I have a pair of NOS to put on the car after the re-paint. I'm waffling a little bit in case just the right 1941 Limited comes along. If it does, I'll sell my 64 Wildcat 2dr hardtop with 46K original miles, just repainted in original colors and with new vinyl multi-color seats exactly like original. Trunk mat is also new, good tires, and custom installed underhood aftermarket A/C. I'll also sell my '39 Buick convertible sedan if an absolutely wonderful 41 Limited comes along. I think I'm going to sell the '39 convertible and my closed car trailer after the first of 2019. Then I'll buy an aluminum open trailer for the closed cars I plan to keep. Reason: I'll turn 80 in October and the 24-foot closed trailer is a handful for an old man like me. I just think reflexes begin to fail after some magic age and I picked 80. Link to comment Share on other sites More sharing options...
Lawrence Helfand Posted April 5, 2018 Share Posted April 5, 2018 pair on ebay now in vintage car and truck parts search 1941 buick Link to comment Share on other sites More sharing options...
Lawrence Helfand Posted April 5, 2018 Share Posted April 5, 2018 Sorry this ebay auction is for rear spears...I have been looking for a right front better then what I have for two years..several nos and used have come too ebay but all for left side. In general right side anything is scarcer for obvious reasons Link to comment Share on other sites More sharing options...
Pete Phillips Posted April 5, 2018 Share Posted April 5, 2018 5 hours ago, pgb123 said: Does anyone make reproduction ones? No. Link to comment Share on other sites More sharing options...
pgb123 Posted April 6, 2018 Author Share Posted April 6, 2018 Thank you for all of your help-Paul Link to comment Share on other sites More sharing options...
41specialman Posted April 14, 2018 Share Posted April 14, 2018 I have a couple sets of front spears but thats not the correct name for them Link to comment Share on other sites More sharing options...
pgb123 Posted April 14, 2018 Author Share Posted April 14, 2018 Good Day, I thought the correct name for the parts was fender spears and what is the correct name for the parts? What is your asking price? 207-727-5855-thanks Paul Link to comment Share on other sites More sharing options...
michel88 Posted April 14, 2018 Share Posted April 14, 2018 I would call them stainless steel front fender moldings. Link to comment Share on other sites More sharing options...
41specialman Posted April 24, 2018 Share Posted April 24, 2018 They are called speed lines (AKA spears) and are pot metal same as grill is made of the chrome is good on them driver quality $125 each or decent offer Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now