alsfarms Posted December 31, 2017 Share Posted December 31, 2017 (edited) OK, I have some pieces that can be built into a project. The bad thing is I do not have a suitable frame from which to start. Please study the attached pictures, particularly the kick up over the rear axle and the transition area at the back of the engine area. These two frame profiles I would like to match as closely as I can. Note: the early Dodge Bros. frame has a very similar profile where it gets wider at the front. I would prefer NOT to use the Dodge Bros. frame as it is not as heavy duty as what I would like to use. If you have an old odd or unidentified frame that is designed close to the frame in my pictures, please drop me a note and send some pictures. Thanks in advance for your thoughts and time. Al Edited January 1, 2018 by alsfarms spelling (see edit history) Link to comment Share on other sites More sharing options...
just me Posted January 1, 2018 Share Posted January 1, 2018 Hi Al I do have a 1914 Cadillac frame that might work for you. Will email some photos in the next few days. . Charley 1 Link to comment Share on other sites More sharing options...
alsfarms Posted January 1, 2018 Author Share Posted January 1, 2018 Hello Charley, Thanks for the note. I will watch for your pictures and see if I can make the Cad. chassis work for me. Al Link to comment Share on other sites More sharing options...
Michael Peternell Posted January 7, 2018 Share Posted January 7, 2018 Sent you a picture. 1 Link to comment Share on other sites More sharing options...
alsfarms Posted January 8, 2018 Author Share Posted January 8, 2018 Thanks for the pictures and information. I need to study further to see if your frame could be altered to fit my need. What is the cross sectional thickness of the frame channel? Al Link to comment Share on other sites More sharing options...
jbbuick22 Posted January 8, 2018 Share Posted January 8, 2018 Al, I have a nice 1922 Buick 124" frame, that my work for you. John 1922 Buick model 55 Link to comment Share on other sites More sharing options...
alsfarms Posted January 8, 2018 Author Share Posted January 8, 2018 PM sent Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now