BuickBob49 Posted February 15, 2017 Share Posted February 15, 2017 My clutch and brake pedals are not even/equal from floorboard to face of pedal on my 1939 Roadmaster Model 81. The clutch pedal measures 6-1/4 inches from face-of-pedal to floor. The brake pedal measures 8 inches from face-of-pedal to floor. What is the optimum distance from face-of-pedal to floor? What is the best way to get them to be equal distance from the floor? You should know that I recently had a clutch job done on the car. Before that, the pedals were even. I have about 1 inch free play on the top of the clutch pedal. Here are a few photos. Thanks! BuickBob49 Link to comment Share on other sites More sharing options...
Daves1940Buick56S Posted February 15, 2017 Share Posted February 15, 2017 Have you checked the pedal linkage clearance to the bottom of the toeboard? There is a spec, probably about 7/8". There is a pedal adjustment, different from the clutch adjustment, to set pedal clearance. Cheers, Dave Link to comment Share on other sites More sharing options...
Glassesguy Posted February 18, 2017 Share Posted February 18, 2017 Your 38 and 39 Shop Manuals show the correct floorboard clearance and how to to adjust for it. I assume you have them. If not, acquire a set immediately. You will need both as the 39 is a suppliment to the 38. Link to comment Share on other sites More sharing options...
pont35cpe Posted February 18, 2017 Share Posted February 18, 2017 Sounds like something different with the replacement clutch assembly... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now