Front license plate bracket pics/ Winged it .

[ArticiferTom]

Hello all ,   Posted above I'm looking for pics and measurements of the four piece bracket that mount front plate to headlight bar on late twenty's early thirty's dodges . Looks similar to two one hole pipe straps bolted together .

                                   Thanks Tom

Edited March 20, 2016 by ArticiferTom
finished (see edit history)

[Spinneyhill]

My DC license plate is attached to the round chassis cross member in front of the radiator. It is much larger diameter than the headlight bar. I can supply photos etc. if they might help.

[ArticiferTom]

Thanks anyway  I did check yours out from photos I have . I have found some in other photos ,just can not see what is on back side . attached is example .

 

[Phil 32DL6]

Tom...PM sent.

[ArticiferTom]

 Thanks  Phil never got response . So I figured I would wing it .  Attached pics my finished product . Used 3/4" x !/8" flat stock ,heated bent around 1" bar squeezed 3/16" short of  shut . Cut to flush of arms one 3 5/8" and other  7 1/8" overall . Short one clamped at 1/4" and bent leg finished about 3/16 or less .

[keiser31]

Beautiful!

[Spinneyhill]

Xclnt. My DC brackets are one piece onto the front chassis cross member. They are packed out with rubber because they were made larger than the mounting beam.