Guest SusanC Posted September 2, 2014 Share Posted September 2, 2014 Just got my baby back from having it overhauled. Now it's time to buff and shine. Very sweet ride.And no, it doesn't belong to my husband, he doesn't like antique cars. It belongs to me. I now have a '24 Buick, a '26 T and a '29 Model A! Link to comment Share on other sites More sharing options...
Jim65Riv Posted September 2, 2014 Share Posted September 2, 2014 Looks great! Early 20's closed cars are very rare. Nice to see another one. Link to comment Share on other sites More sharing options...
JohnD1956 Posted September 2, 2014 Share Posted September 2, 2014 PICTURES... we need more pictures of this great car. Link to comment Share on other sites More sharing options...
Dwight Romberger Posted September 3, 2014 Share Posted September 3, 2014 Nice car Susan! Link to comment Share on other sites More sharing options...
Guest SusanC Posted September 3, 2014 Share Posted September 3, 2014 Thanks!4 cyl. Relatively rare I believe.....Nice car Susan! Link to comment Share on other sites More sharing options...
ROD W Posted September 3, 2014 Share Posted September 3, 2014 There were 5,479 Model 24-33 Opera Coupe,s built for the domestic market and 30 for export out of a total production of 160,411 in 1924. 1924 was the last year for 4 cylinder Buicks, and the first year for four wheel brakes Link to comment Share on other sites More sharing options...
Thriller Posted September 4, 2014 Share Posted September 4, 2014 Very nice. Link to comment Share on other sites More sharing options...
Guest SusanC Posted September 10, 2014 Share Posted September 10, 2014 Thanks![ATTACH=CONFIG]267963[/ATTACH][ATTACH=CONFIG]267964[/ATTACH]4 cyl. Relatively rare I believe.....This car had been sitting for some years in a garage. An elderly lady (not that I am not elderly) owned the car and I bought it from her estate. We had quite a check list of items to work on to get her running smoothly. I initially was able to start and drive the car but then had something 'break". It was not a simple fix. We found the distributor out of time with the engine and when we removed the distributor cap to check the points for spark we found the distributor rotating with just the ignition switch on. The timing pin in the water pump shaft was broken and the starter drive clutch was locked up and the clutch collar was broken. All had to be disassembled. No parts were available for the starter drive clutch. The clutch had to be sent to a starter builder in Michigan to be repaired. The distributor was frozen solid. BTW a new timing pin was made from a stainless steel 1/4 x 20 screw and self-locking bolt.The water pump shaft that runs the distributor is worn beyond use on the back side of the water pump. So if anyone knows where I could find a new or used water pump please let me know.The carburetor had to be repaired, most of the gaskets were crushed. etc.etc. The radiator had a hole it in so it was removed and cleaned and repaired.Every lube pint in the entire car was dry so the whole thing was lubricated and all fluids replaced. BTW I'm also looking for a pivot bolt for the right front spring and a nut is missing on the left rear spring pivot bolt. The list goes on and on but altogether the car's foundation is really good. I believe she will run for a few more years. Hope to see you out on the road. Link to comment Share on other sites More sharing options...
motoringicons Posted September 10, 2014 Share Posted September 10, 2014 Great car. Those 1920s Buicks are wonderful driving automobiles. Congratulations on your exciting purchase. Enjoy! Link to comment Share on other sites More sharing options...
Guest SusanC Posted September 26, 2014 Share Posted September 26, 2014 The seams on the roof have pulled apart. I need to 'glue' them together until I can find a 'topper' to make a new top. I don't want moisture getting in. Does anyone have any suggestions? Link to comment Share on other sites More sharing options...
Dwight Romberger Posted September 26, 2014 Share Posted September 26, 2014 (edited) Sikaflex 1A Apply with a caulking gun.Designed for all types of joints where maximum depth of sealant will not exceed 1/2 in Excellent for small joints and fillets, windows, door frames, reglets and flashing Suitable for vertical and horizontal joints; readily placeable at 40 deg F Has many applications as an elastic adhesive between materials with dissimilar coefficients of expansion Submerged conditions, such as canal and reservoir joints Fast tack-free and final cure times High elasticity - cures to a tough, durable and flexible consistency Excellent adhesion - bonds to most construction materials without a primer Excellent resistance to aging, weathering Odorless, non-staining Paintable with water, oil and rubber-based paints 1a is a class 35 sealant with +/-35% movement USDA-approved, Sealant, Waterproofing and Restoration Institute (SWRI) validated 1-part, non-sag, polyurethane elastomeric sealant/adhesive Sikaflex-1a is a premium-grade, high-performance, moisture-cured, polyurethane-based sealant Meets Federal specification TT-S-00230C, Type II, Class A Meets ASTM C-920, Type S, Grade NS, Class 25, use T, NT, O, M, G, I; Canadian standard CAN/CGSB 19.13-M87 Designed for all types of joints where maximum depth of sealant will not exceed 1/2 in Excellent for small joints and fillets, windows, door frames, reglets and flashing Suitable for vertical and horizontal joints; readily placeable at 40 deg F Has many applications as an elastic adhesive between materials with dissimilar coefficients of expansion Submerged conditions, such as canal and reservoir joints Fast tack-free and final cure times High elasticity - cures to a tough, durable and flexible consistency Excellent adhesion - bonds to most construction materials without a primer Excellent resistance to aging, weathering Odorless, non-staining Paintable with water, oil and rubber-based paints 1a is a class 35 sealant with +/-35% movement USDA-approved, Sealant, Waterproofing and Restoration Institute (SWRI) validatedIt is recommended in a MTFC videoI used it in the construction of a new design roof insert. I worked extremely well. I have used it in the roofing industry with superior results.http://forums.aaca.org/f165/new-roof-insert-complete-359066.html Edited September 26, 2014 by Dwight Romberger (see edit history) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now