knobless Posted June 8, 2014 Share Posted June 8, 2014 finish the aprons, slight change on the bottom stiffers, they used a single pice of sheet stock spot welded, I chose to make up a narrow sleeve which slips onto bottom, afew brass rivets will hold it in place along with the bolt, ( bolt hole needs drilling ) little more clean up and filing and then prime and paint,,,my cost about $40. plus a little time well spent,,,,shinker and stretcher come in handy for these pieces........ Link to comment Share on other sites More sharing options...
30DodgePanel Posted June 8, 2014 Share Posted June 8, 2014 Nice work ! :cool:Metal work is time consuming but rewarding... Link to comment Share on other sites More sharing options...
countrytravler Posted June 8, 2014 Share Posted June 8, 2014 finish the aprons, slight change on the bottom stiffers, they used a single pice of sheet stock spot welded, I chose to make up a narrow sleeve which slips onto bottom, afew brass rivets will hold it in place along with the bolt, ( bolt hole needs drilling ) little more clean up and filing and then prime and paint,,,my cost about $40. plus a little time well spent,,,,shinker and stretcher come in handy for these pieces........Nice work Link to comment Share on other sites More sharing options...
Ian_Greenlaw Posted June 8, 2014 Share Posted June 8, 2014 Steve,great work. What about posting some shots when you bought the car ? Link to comment Share on other sites More sharing options...
knobless Posted July 19, 2014 Author Share Posted July 19, 2014 Steve,great work. What about posting some shots when you bought the car ?Here it is The day I bought it....... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now