rustrodsrule Posted May 22, 2014 Share Posted May 22, 2014 I just inherited this car. It is very solid the only rust it at the bottom of the cowl at the floor line. The engine is in pieces but I am told it is all there. Can anyone tell if it is worth anything? Thanks Mike Link to comment Share on other sites More sharing options...
hook Posted May 22, 2014 Share Posted May 22, 2014 Go to www.franklincar.org and read all about your new car! Lots of pictures to. Link to comment Share on other sites More sharing options...
29 franklin Posted May 22, 2014 Share Posted May 22, 2014 I think your car is a model 135 not 130.Because of the hood and dash. Do you have the vin?This could be a real nice driver with some work. Link to comment Share on other sites More sharing options...
rustrodsrule Posted May 23, 2014 Author Share Posted May 23, 2014 Thanks for replying to my question. I have the Vin # 30145704 Thanks Mike Link to comment Share on other sites More sharing options...
Steve Braverman Posted May 23, 2014 Share Posted May 23, 2014 It's a 130. Expect to spend $5-10k on the engine. You could use it as-is, or spend another $20k minimum on paint, chrome and upholstery. Link to comment Share on other sites More sharing options...
29 franklin Posted May 24, 2014 Share Posted May 24, 2014 That number is the engine number. The vin would be on a plate above the engine on the pass. side cowl.The last owner is a M. Field in Oklahoma.Is that your family?Good luck with your car!It is a model 130 sorry for the error. Link to comment Share on other sites More sharing options...
odat Posted May 26, 2014 Share Posted May 26, 2014 I own a 29 130 and it does not have louvers in the hood and the dash is oval not the square type. I do think it is a 135/137. I do not know but it is different from my 29. Link to comment Share on other sites More sharing options...
odat Posted May 26, 2014 Share Posted May 26, 2014 I own a 29 130 and it does not have louvers in the hood and the dash is oval not the square type. I do think it is a 135/137. I do not know but it is different from my 29.10 /15 years ago it cost $35000.00 for the body. $4500.00 for the interior . And about $6000.00 for some engine work. I did most of the mechanicals myself and it took close to 2 years.It was worth every penny and tim,e spent. We have more fun in and with that car and the Franklin club than should be allowed. I am now doing a 32 sedan. Join the sickness it is worth it!! Link to comment Share on other sites More sharing options...
rustrodsrule Posted May 28, 2014 Author Share Posted May 28, 2014 Thanks Link to comment Share on other sites More sharing options...
rustrodsrule Posted May 28, 2014 Author Share Posted May 28, 2014 Thanks for the information Link to comment Share on other sites More sharing options...
Steve Braverman Posted May 28, 2014 Share Posted May 28, 2014 I've seen 130s with louvres and without, and with both types of dashboards. Link to comment Share on other sites More sharing options...
rustrodsrule Posted May 28, 2014 Author Share Posted May 28, 2014 Thanks Link to comment Share on other sites More sharing options...
odat Posted May 29, 2014 Share Posted May 29, 2014 does anybody know why that is? I have a 29 130 with a smooth hood and an oval dash. I have thought that the lovers and different dash make the 135/137 models.Is this an option that was available. For all models? Was it different times of the year. Maybe cold weather /warm climate areas? 29 was the BIG year for Franklin so I do not think it would have been use what they had mode yet like 32. I have only seen 1 other oval dash so far. Any ideas??? Link to comment Share on other sites More sharing options...
hook Posted May 29, 2014 Share Posted May 29, 2014 Dick, If you check your parts book you will find the "so called oval Dash" used up to serial number 30-189551-L-11 and the rectangular dash used after that in 130 models. The hoods are the same but with different ending serial numbers.Bill Link to comment Share on other sites More sharing options...
Guest groinky Posted May 29, 2014 Share Posted May 29, 2014 I've also got a 1929 Model 130 with louvres in the hood and the rectangular dash. I also note that your ignition switch is mounted in the wrong position. Originally the coil was mounted under the dash with the key mechanism on the end sticking thru the empty hole on your dash panel. The cigar lighter went in the hole now used for the ignition switch. Good luck. You have a great car. Jim Link to comment Share on other sites More sharing options...
rustrodsrule Posted May 30, 2014 Author Share Posted May 30, 2014 Thanks everyone for all the information. I was told that late production 29 130 had the louvers and the rectangular dash. The ignition switch is not original and my coil is mounted on the pass side fire wall. Again thanks for all the info. Mike Link to comment Share on other sites More sharing options...
ericmac Posted June 9, 2014 Share Posted June 9, 2014 Mike, I have a pair of 1929 Franklins, both 137's. Neither are as "together" as your car. I suggest getting yours running and driving and having some fun with the car. I doubt the car will ever be worth a whole ton of money. Us Franklin guys know that it is one of the few "affordable" classics but the bargain buys both a neat car and a great group of people who share comaradery and spirit, which keeps the club (which you should join!) interesting and fun. Plus, as you will find, the cars are absolutely wonderful on the road. Congratulations on an enviable inheritance and welcome to the Franklin fold!Eric Link to comment Share on other sites More sharing options...
rustrodsrule Posted June 9, 2014 Author Share Posted June 9, 2014 Thanks again every one for all the information.Mike Link to comment Share on other sites More sharing options...
Guest davidlamphere Posted June 23, 2014 Share Posted June 23, 2014 I have a 1929 Model 135 with the square dash. Yours looks like a 5 passenger to me with the rear fender cut out in the door. Mine has dual side-mounts and the emergency brake on the left making access difficult. It also has wire wheels. Link to comment Share on other sites More sharing options...
Guest aircooledcars Posted July 5, 2014 Share Posted July 5, 2014 If the engine has not been started in many years, you will want to drop the oil pan and check the clearance on the lower end of the engine. The oil pan on the 1920 Model 130 doesn't want to come out easily. Can you remove the tie rod and gain enough clearance to drop the pan or what is the secret to removing the pan without removing the engine? thanks Link to comment Share on other sites More sharing options...
odyssey Posted July 5, 2014 Share Posted July 5, 2014 On the series 12 and 130 pans, if removing the flywheel guard does not give enough room, you can jack up the frame and let the front axle hang free. This gives enough room.tom Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now