rockitdoc Posted December 11, 2013 Share Posted December 11, 2013 Hi,I am trying to restore the latch mechanism on my '41 Continental Coupe. I know, lots of rust. Anyway, I must be missing some bits, because I can't figure out how this must have worked. The pic below is what I have. The pic shows three pieces and I also have a pivot bit that measures 0.500" long and is about 0.500" dia at the widest part in the center. It's at the machine shop being reproduced.What is the piece or pieces I am missing? Are they available or can somebody send me drawings so I can make them?Thanks, in advance, as usual.S Link to comment Share on other sites More sharing options...
Guest Bruce Nussman Posted December 12, 2013 Share Posted December 12, 2013 If the other fender skirt is good, it should show you what is needed.Good luck! Link to comment Share on other sites More sharing options...
rockitdoc Posted December 12, 2013 Author Share Posted December 12, 2013 If the other fender skirt is good, it should show you what is needed.Good luck!Yeah, right. But, no such luck.The other side is worse. Link to comment Share on other sites More sharing options...
Waldren Posted December 12, 2013 Share Posted December 12, 2013 1940 and 41 Zephyr and Continental latches are the same The Continental has an extension on the bottom. I have a pair of nos lock nuts left from my 41.. If interested pm me. Lee Waldren Link to comment Share on other sites More sharing options...
40ZephSedan Posted December 24, 2013 Share Posted December 24, 2013 Hey Rockitdoc, Photos of mine, looks like my 40 sedan may be the same as your 41 Cont, as stated in the thread. Still searching for more information, or did you find what you need? I can take it apart and get some photos/dimensions if you still need it. Paul Link to comment Share on other sites More sharing options...
DSpringer Posted December 24, 2013 Share Posted December 24, 2013 (edited) Here is a sketch I made of the inside of the latch mechanism from my '41 Sedan that shows all the parts. The bolt is held in place (square hole) by a screw and washer. There are two pieces to the short linkage and they sandwich the lever and the larger latch plate. Looks like you have all the pieces except the pivot pins-Dave Edited December 24, 2013 by DSpringer (see edit history) Link to comment Share on other sites More sharing options...
rockitdoc Posted December 24, 2013 Author Share Posted December 24, 2013 Hey Rockitdoc, Photos of mine, looks like my 40 sedan may be the same as your 41 Cont, as stated in the thread. Still searching for more information, or did you find what you need? I can take it apart and get some photos/dimensions if you still need it. Paul[ATTACH=CONFIG]228025[/ATTACH][ATTACH=CONFIG]228026[/ATTACH]Paul,Don't take it apart. It's a pita to get it back together. I got it figured out, I think. I'm fabricating new covers for mine, and one of the link mechanisms was assembled backwards. That's why one side didn't retract all the way. I'll post pictures of the new covers with the old ones when I get them done and before I put it all back together in case someone else is needing to do this. Scott Link to comment Share on other sites More sharing options...
rockitdoc Posted December 25, 2013 Author Share Posted December 25, 2013 Paul,Is there a captive nut welded to the latch at the top where that big headed slotted machine screw attaches the mechanism to the skirt? Link to comment Share on other sites More sharing options...
John Murphy Posted December 25, 2013 Share Posted December 25, 2013 Yep. Just epoxy a nut or a "D" nut in the hole. Link to comment Share on other sites More sharing options...
40ZephSedan Posted December 27, 2013 Share Posted December 27, 2013 Like John says, just any nut that thread size should work, as long as it doesn't spin. Orig looks like a round nut, that was possibly spin welded so it won't turn. Paul Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now