1936 Buick Model 90 wheels

[Guest 1936Buick90]

WTB 4 1936 Buick Model 90 Wheels. Model 80 possibly same.

Thanks

[1939_Buick]

From the 1928-41 Master Parts book 1936 S90 has 16x7.5 wheels.

Is listed as 1 year only part number, but that does not mean other years will not fit.

1936 S80 has 16x7 (also 1 year only part number)

Try http://forums.aaca.org/f165/dave-tachney-341710.html

[Seldenguy]

I do not know, but always suspected the one year was because of the factory applied sunburst pinstripe. As for '36 only?, I know '36s fit on '37s.--Bob

[1939_Buick]

The 1928-1952 Parts book (pg 204) has primed wheels as a single part number covering a broader range of years & models.

However 1936 S80 & S90 are noticeably missing. 1936 S40 & S60 are listed

1937 S80 & S90 are listed as 16x7.00

1938-39-40 S80 & S90 & 1941-42 S90 also have 16x7.5 wheels (1 part number as primed). But are not the pseudo "spoke" design of '36's

Genuine 1936 S90 will be hard to get

1936Buick90 : We like photos

Edited February 9, 2013 by 1939_buick (see edit history)

[Guest 1936Buick90]

I will take a picture tonight. If model 80 fit I would be ok with them. Its 5 on 5.75 I believe.

[1939_Buick]

What wheels are on it now ?

If you are a BCA member you advertise in "parts wanted" in the Bugle.

But a phone call to Dave T best initially. He can be hard to contact

Edited February 9, 2013 by 1939_buick (see edit history)

[50jetback]

Stud pattern from later models will enable them to fit but are not right due to 1936 being artillary type metal spokes ( 1 year only!! ).

1936 Buick Motor Company Book of Parts lists:

1936 - 80 as 16 X 4.50

1936 - 90 as 16 X 5.00

1936 Century wheels may fit but they are 15"

1936 - 40 are 16 X 4.25 but I know from experience the stud pattern is different and won't fit the Century 60 series and most probably not the 80 or 90 Series

Edited February 9, 2013 by 50jetback (see edit history)

[nwclassics]

i have a set of 16-5 5on 5 bolt pattern for a buick call george 406-5432591

[MrEarl]

On 2/8/2013 at 8:51 PM, 50jetback said:

Stud pattern from later models will enable them to fit but are not right due to 1936 being artillary type metal spokes ( 1 year only!! ).

1936 Buick Motor Company Book of Parts lists:

1936 - 80 as 16 X 4.50

1936 - 90 as 16 X 5.00

1936 Century wheels may fit but they are 15"

1936 - 40 are 16 X 4.25 but I know from experience the stud pattern is different and won't fit the Century 60 series and most probably not the 80 or 90 Series

 

Are all the above 5 on 5.5 ?