Guest 1963 Riviera Posted January 17, 2012 Share Posted January 17, 2012 It seems I have bad contacts on my Rear Lamp Sockets. All Illumination works at one time or another on both sides, in fact after playing around with them last night, tweeking the inserts etc, everything seem to be working fine and today the left brake light was not working. So before taking it to the Auto Electrician and spending $$$, I am thinking of replacing the sockets. Surprised that Cars do not carry this part nor does the Buick parts site have the specific model. I have located the correct ones on ROCKAUTO.COMHas anybody had a similiar problem rectified by replacing the socket ?replacing this[ATTACH]114527With ThisNick Sunny Sydney Link to comment Share on other sites More sharing options...
steelman Posted January 17, 2012 Share Posted January 17, 2012 Had the same issue with my brake lights when I first bought my car. Work fine for a while, the quit. Came back for a while, then quit on the other side. What cured mine once and for all was not the sockets. There is a plug under the carpet on the driver's side. Seems to connect the front and rear halves of the wiring. Found this when I had the seats and console out working on the heater core. May be able to see it by just removing the door sill plate and peeling back the carpet. If not, may have to remove the driver's seat to find it. Clean and secure this connection and your brake/taillight issues go away. At least mine did. Maybe it will work for you, too. Link to comment Share on other sites More sharing options...
RivNut Posted January 17, 2012 Share Posted January 17, 2012 (edited) This is a pretty common problem with cars this age. The circuit uses the diecast housing for a ground and over time it just kind of gives out on you. The easiest fix for this is to get a universal socket that has the same diameter as the OE socket BUT with a dedicated ground wire. Run that new ground wire to a fresh clean ground on the frame and 99% of the time your problem will be fixed.EdHere's a link to an Advanced Auto site that shows the kind you need. Two wires and the expanding metal clips that snap into the tail light housing.http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/product_Pigtail-Socket-BWD_20974587-P_758_R%7CGRPLAMPAMS_____ Edited January 17, 2012 by RivNut (see edit history) Link to comment Share on other sites More sharing options...
1965rivgs Posted January 17, 2012 Share Posted January 17, 2012 The brake light circuit goes thru the turn signal switch. If the switch is not in a neutral position, as is very common when the sheath on the turn signal actuating wire goes bad (tilt wheel only), the brake lights will only illuminate on one side. After you sort out the basics like good ground and connections, try positioning the tilt wheel in several locations when one brake light is out and you may find that is your problem. Tom Mooney Link to comment Share on other sites More sharing options...
Jim Cannon Posted January 18, 2012 Share Posted January 18, 2012 I agree with Tom. Listen to him.Bad ground usually changes characteristics with parking lights on and off. Suddenly what used to work does not, etc.Bad turn signal switch actuator cable (tilt column) will not change behavior with parking lights on or off. But it will change how the brake lights work after applying the turn signal in one direction, and then the other. Link to comment Share on other sites More sharing options...
Guest Kingoftheroad Posted January 18, 2012 Share Posted January 18, 2012 I had to replace one of my rear light sockets, I found a replacement at a local auto parts store, fits & works great ! Link to comment Share on other sites More sharing options...
Guest 1963 Riviera Posted January 18, 2012 Share Posted January 18, 2012 HI,Just want to say a BIG THANK YOU for your replies.I am new to this and having your support makes me feel confident on taking on this amazing car.Browsing through the thousands of posts I see there is an incredible BRAINS TRUST hereThanks again Nick Link to comment Share on other sites More sharing options...
CheezeMan Posted January 18, 2012 Share Posted January 18, 2012 Nick,I replaced mine with new ones, just to be safe. The brake lights didn't work much, but after putting on new ones they work every time! I think I got them from RockAuto. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now