slightmiss Posted April 28, 2011 Share Posted April 28, 2011 this Radiator os made of a brass shell and honeycomb core. it is 25 inchs wide and 24 and 3/4 high. (from base to the top below the neck.) Any Ideas would be appricated. Link to comment Share on other sites More sharing options...
Layden B Posted April 28, 2011 Share Posted April 28, 2011 Here is a 1910 Selden Link to comment Share on other sites More sharing options...
TheMoneyPit Posted April 29, 2011 Share Posted April 29, 2011 Wonder if the body is also Selden - I'm not sure if he put a patent plate on his own cars. Link to comment Share on other sites More sharing options...
Seldenguy Posted April 30, 2011 Share Posted April 30, 2011 I believe you are right Layden, The Selden used a "five panel" hood it's entire life. And this radiator shows this hood configuration. And at the bottom the curve of the front trim and lower tank match's the front crossmember. I have not seen a Selden with a honeycomb core, they were always a celluar square tube much like the Mercedes. But it could have been recored. I vote with you! Moneypit; Yes he did put the Selden patent plate on his own cars. He had to answer to the ALAM as a manufacturer. He also made his bodies here in Rochester but did farm some work out to a firm in Buffalo NY. --Bob Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now