Guest johnnydef47 Posted September 5, 2010 Share Posted September 5, 2010 i am looking to buy an old army jeep but i don't think it has brake lights...any thoughts or suggestions on how to install them or kits or brands. thanks Link to comment Share on other sites More sharing options...
R Walling Posted September 5, 2010 Share Posted September 5, 2010 Installing brake lights on a vehicle is very easy. You will probably have to replace old rotted brake lines any ways.When installing the new brake line, simply do it in two short sections, and between the two of them install a tee that has two threaded holes for the lines, and one female 1/8’ pipe thread.<O:pThen on the tee, screw in a brake light switch and run a hot wire to one side of it, and then connect the other side to a brake light.<O:p<O:pYou may have to get a new stop and taillight assy.<O:pYou will of course, have to bleed the brakes when you are done.<O:p<O:pDo not pass up this rare opportunity to buy such a desirable vehicle. There are many that will help you with this project.<O:p Link to comment Share on other sites More sharing options...
Guest windjamer Posted September 5, 2010 Share Posted September 5, 2010 :)Johnny,first off Welcome aboard,You will meet many good people here to offer help and advise. Next google millatary Surplus Im sure you can find the lights there. If not any good parts store wil have external lights you can mount. Pick up a can of olive drab paint and your on your way. Remember we like pictures. Link to comment Share on other sites More sharing options...
Guest johnnydef47 Posted September 5, 2010 Share Posted September 5, 2010 thanks guys Link to comment Share on other sites More sharing options...
Guest 1hooligan Posted September 5, 2010 Share Posted September 5, 2010 Johnny Welcome, one thing that you should consider at this point is replacing the wiring. Now dont faint. It is not as hard as you may think. If you want to stay stock, there are several companies that make exact replacement kits. Or if you are not concerned, after market kits, as low as $125. that are great. All of the wires are marked as to where that go and have the correct wire size for todays demands. Also, most have tech support for you.One other thing to think about is updating with LED lights bulbs. They can be easily installed in most original cannisters, and for safety MUCH brighter. Help, just ask there are several guys and girls that will step up to help. Pat Link to comment Share on other sites More sharing options...
Rusty_OToole Posted September 5, 2010 Share Posted September 5, 2010 By 1945 all vehicles had brake lights and tail lights but not all had turn signals. Adding turn signals is not very hard. You have to change the sockets from a single filament bulb to a double filament bulb, and add a control lever to the steering column. The controls are still available at flea markets etc. in fact I think you can still buy them new from auto parts stores. Plus change a few wires.This was a very common job in the late 40s and early 50s. Turn signals did not become mandatory until 1951 and many older cars came without them. Link to comment Share on other sites More sharing options...
mrspeedyt Posted September 5, 2010 Share Posted September 5, 2010 (edited) check g503.com.... a military jeep website. also thecj2apage.com. LOTS of info!! Edited September 5, 2010 by mrspeedyt (see edit history) Link to comment Share on other sites More sharing options...
rcr Posted September 5, 2010 Share Posted September 5, 2010 Army jeeps most certainly do have brake lights. The master light switch must be in the correct position or there will be no lights at all. If you have a 45 jeep, the rotary switch has an instruction plate behind it. If you have a pull switch it must be pulled out all the way for service stop light. The brake light will only be on the left side and the blackout brake light will be on the right side at the top. Blackout lights will work with the switch pulled out to the first notch. The headlights will work with the switch pulled out to the second notch along with the left taillamp and the left brake light. Link to comment Share on other sites More sharing options...
rcr Posted September 5, 2010 Share Posted September 5, 2010 I forgot to mention that you will be unable to pull the switch knob out past the first notch unless you depress the blackout lock button. This button keeps one from inadvertently pulling the switch on to headlights at an unwanted moment. The same goes for the rotary switch. It also has a lockout button. Until you get good at it , it takes two hands to turn the headlight switch on. Link to comment Share on other sites More sharing options...
Guest johnnydef47 Posted September 6, 2010 Share Posted September 6, 2010 this is the jeep i was looking at. i think it may actually be a hybrid or something used on an air base. there are no rear light but it does start righ up and drive. its definatly needs a total rehaul but it has the original engine and a new 12volt system these pics are old but i saw the jeep yesterday and it looks the same Link to comment Share on other sites More sharing options...
Guest Bob Call Posted September 6, 2010 Share Posted September 6, 2010 (edited) My guess is that someone grafted the pickup bed on after cutting off the body from the cowl rearward. That would explain the absence of a tail light. I believe most military vehicles were 24 volt but I maybe wrong. I remember when driving a deuce and a half having to do an inspection before leaving the motor pool and that included checking all fluids. They have 24 volt systems and the ignition wiring was weather proofed not like standard civilian wiring. I drove both Studebakers and GMCs.So, I'm saying don't overpay for this. Myself I would consider it a parts car. Edited September 6, 2010 by Bob Call (see edit history) Link to comment Share on other sites More sharing options...
Guest johnnydef47 Posted September 6, 2010 Share Posted September 6, 2010 i did a little checking online and it said the 24 volt was from 52. i am told this jeep is 45 or 46. i was hoping to restore as it run and drives although i know its graphted. you think 600 is too much? Link to comment Share on other sites More sharing options...
Guest Bob Call Posted September 6, 2010 Share Posted September 6, 2010 Another thought. If it is a military jeep there should be a "Nomenclature" plate on the instrument panel that identifies it as a Truck, Utility 4 X 4, Model 1938. The model may have a suffix like A1 or A2 indicating a modification from the original Model 1938. If I recall correctly this plate would be on the right hand side of the instrument panel. A military model should be more valuable than a civilian model.Assuming that the engine and running gear are in good rebuildable condition and the original front sheet metal is not rusted out, it should be worth $500 to $600. Worst case you could part it out and recover your money. Restoring it the original 1945 condition may not be cost effective. Link to comment Share on other sites More sharing options...
Guest Bob Call Posted September 6, 2010 Share Posted September 6, 2010 Just took another look at the pictures. The data and instruction plate sure looks civilian to me I don't recall ever seeing anything like that on any military vehicle I drove. Also, the grill and lights look civilian. There should be a military jeep club website somewhere that could help make an exact idientification of this truck. Link to comment Share on other sites More sharing options...
sambarn Posted September 6, 2010 Share Posted September 6, 2010 600 bucks for a toy you love and can move around the shop by starting and driving is a good price. Do be aware of what you want from this car -A show winner?? A daily driver?? A weekend offroader?? If you are thinking about value and profitability of a 600 dollar car -you may be in the wrong hobby. Love is never cheap. I just bought a 1959 Morris Minor pickup that i have lusted after for 30 years - My friend finally let it go and I had to have it - It was in the same price range as your Jeep and I figured "How can I go Wrong". I was right - got it running easily drives fine - now on to body and paint and I'm as happy as a Pig in Slop. Buy it, Drive, Love it. Link to comment Share on other sites More sharing options...
mrspeedyt Posted September 6, 2010 Share Posted September 6, 2010 if it runs good and if it is fairly close (500 miles) i'd buy it for $600. where's it located?? Link to comment Share on other sites More sharing options...
Guest johnnydef47 Posted September 7, 2010 Share Posted September 7, 2010 i would tell you where it is located but i am afriad you may get to him before me lol. i plan on fixing this up little by little to run alot in the summer some off roading and just plain having fun. i had an all original 1947 new yorker which i loved and sadly got rid of so i know i what i have coming with this but i am a jeep man anyway so its worth it. Link to comment Share on other sites More sharing options...
Guest johnnydef47 Posted September 7, 2010 Share Posted September 7, 2010 one other thing i forgot to mention. there is no title which is worying me a little i know i can get one generated but i cannot find one naywhere on the vehicle. its not on the black panel on the dash. any thoughts? Link to comment Share on other sites More sharing options...
mrspeedyt Posted September 7, 2010 Share Posted September 7, 2010 i think there should be a plate on the right side of firewall... check those websites that i listed in my first post. Link to comment Share on other sites More sharing options...
Rusty_OToole Posted September 7, 2010 Share Posted September 7, 2010 If you like it buy it. You can have a lot of laughs for $600 bucks but you will never have a show winner or museum piece. I'd keep it as is, representing an authentic example of how Jeeps were used on ranches and farms back when they were something new.Naturally if you can buy it for less you should. I'm just saying, if it appeals to you, enjoy it for what it is but don't try to make it something it isn't. Link to comment Share on other sites More sharing options...
Jim Rohn Posted September 7, 2010 Share Posted September 7, 2010 runs & drives for 600 bucks????? that is a no brainer ... someone will always be waiting in line to give you AT LEAST your $660 back, I would guess way more ... like 2-3x easyafter all it IS a Jeep ... Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now