R Walling Posted March 28, 2010 Share Posted March 28, 2010 It is very easy to instal turn signals using the original wireing. You will only need to add one additional wire for the rear lights. Instal a handy dandy turn signal switch to your steering column (available at JC Whitney) and cut the brake light wire going to the back and connect it to the brake light wire on the new switch. Then cut the brake light wire in the rear, that goes from one brake light to the other. Connect that wire to the new wire and send it to the new signal light switch as a signal light wire.Connect the front end of other brake light wire to the new switch as the other signal light. (The brake light and signal lights are the same bulb, and use the same wires from the front of the car.) Continue with the instructions on the box and you have a system with very little modification to the original wireing. On my 31 Essex, I just changed the front parking light sockets to a two filiment socket and ran two new wires to them for the front signal lights. Link to comment Share on other sites More sharing options...
Guest Tusler 49 New Yorker Posted June 20, 2014 Share Posted June 20, 2014 Here you go, I was looking for something to increase my visibility when turning but I did not want to do a big installation. These are battery operated, rechargeable and completely wireless with a digital signature so nothing will interfere with operation.Easily removable and requires no changes to the car. http://smartsignals.com/cms/ Link to comment Share on other sites More sharing options...
gregleck Posted February 10, 2015 Share Posted February 10, 2015 I thought the smart signals were great, too, but they have apparently been unavailable for a year now.I received no answers to numerous phone messages left on voicemail, or email, requesting information on when they may be available.I am now going to use 12 volt LEDs which will be run by a small, rechargeable SLA 12 volt battery, keeping it separate from my 6 volt system. Link to comment Share on other sites More sharing options...
Guest Al Brass Posted February 10, 2015 Share Posted February 10, 2015 I have seen wireless units for sale on e-Bay. I cannot recall if they work on 6V and I have no idea if they are any good but it might be worth a search. The idea is good for old car use.Al Link to comment Share on other sites More sharing options...
R Walling Posted February 12, 2015 Share Posted February 12, 2015 I have a 31 with only one tail/brake light. I solved the problem by installing small, but bright "third brake lights" in the rear window. They are cemented to the glass in the bottom corners and are not noticeable when they are not on. Link to comment Share on other sites More sharing options...
gregleck Posted February 13, 2015 Share Posted February 13, 2015 I have a 31 with only one tail/brake light. I solved the problem by installing small, but bright "third brake lights" in the rear window. Roger, do you have a 6 volt system? Are the third brake lights LED bulbs? Link to comment Share on other sites More sharing options...
John Byrd Posted February 13, 2015 Share Posted February 13, 2015 Roger, do you have a 6 volt system? Are the third brake lights LED bulbs? Yeah, what greglek asked ! I have an old Anglia that I would like to brighten up its hind end with signals and a 3rd brake light. Link to comment Share on other sites More sharing options...
gregleck Posted February 13, 2015 Share Posted February 13, 2015 There are 6 volt LED lights available, but in limited selection. No 6 volt amber LED bulbs, for example, but there are amber colored bulb sleeves you can use.You can also use a small, SLA 12 volt battery to run 12 volt LED running lights and turn signals on a separate, stand alone system. An advantage of thisis you can use a 6 volt bulb which is white to use as a running light, but when the turn signal switch is activated it turns color to amber and blinks.Brake lights are more problematic. There are red and white 6 volt, dual filament LEDs. Adding a 12 volt LED brake light to the 6 volt system is more complicated.Some 12 volt LEDs will work in 6 volt bases, but will not be as bright. Others won't work at all. Many LED bulbs are also polarized so will not workif put in backwards, but incandescent bulbs work either way. Link to comment Share on other sites More sharing options...
cahartley Posted February 13, 2015 Share Posted February 13, 2015 I installed 6V brake/signal lights on both of my T's.I couldn't let 8 little drilled holes get in the way of possibly saving my car, my life or both....... :eek: Link to comment Share on other sites More sharing options...
Dwight Romberger Posted February 13, 2015 Share Posted February 13, 2015 (edited) This place has 6 volt (+ or - ground) (single or dual circuit) amber yellow volt LED's that I have used as turn signals. Just like the 12 volt, they are clear and turn amber yellow when you turn them on. Very bright:http://www.ledlight.com/24-led-light-s25-6-volt-dc-positive-or-negative-chassis-non-polarity-sensitve.aspx Edited February 13, 2015 by Dwight Romberger (see edit history) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now